Quantcast
Channel: Product Reviews Archives » Best. Saxophone. Website. Ever.
Viewing all 107 articles
Browse latest View live

Get more rhythmically out of your playing with Bill Plake’s New E-Book

$
0
0

Bill Plake’s “Essential Polymeter Studies In 4/4”

polyrhythm

essential_polymeter_noname 1

Introduction

Before I talk about Bill’s e-book Essential Polymeter Studies In 4/4, I thought you might want to find out more about the author. Bill Plake is “a saxophonist, flutist, composer, and an Alexander Technique teacher, certified by the American Society for the Alexander Technique (AmSAT). He is also certified as a personal fitness trainer through the National Academy of Sports Medicine (NASM).”

Over Bill’s 35 years as a musician, his work is “primarily in the world of modern jazz and other conceptually unique forms of improvisation. A few of the artists he has worked with to date are: Charlie Haden, Nels Cline, Vinny Golia, Jaki Byard, James Newton, Larry Koonse, Michael Vlatkovich, John Carter, Steuart Liebig, Matt Otto, Harry Scorzo, Chris Garcia, Billy Mintz, and Kim Richmond.”

Bill, “has been on the faculty of the American Musical and Dramatic Academy in Los Angeles, teaching the Alexander Technique to actors, singers and dancers. In addition, he teaches the Alexander Technique as a guest lecturer and adjunct at California Institute of the Arts, and at Pomona College.” While teaching, Bill is always looking for new ways to practice: “expanding his rhythmic vocabulary, challenging his sense of form, finding new ways of organizing melodies, thinking differently about tonality, and ultimately increasing his freedom and fluency.”

Book Overview

The Essential Polymeter Studies In 4/4 is a jazz e-book that specifically focuses on rhythm and time. Plake discusses both polyrhythm and polymeter and how “Polyrhythm involves playing (or implying) two or more distinct beats simultaneously (e.g., three beats against two, as in the case of an eighth note triplet being played against two regular eighth notes), while polymeter involves implying two or more metric subdivisions at the same time (e.g., 5/4 over 4/4).”

The book contains nearly 150 pages of notated exercises with almost each exercise transcribed in all 12 keys. Plake decided to focus on some of the most common polymetric subdivisions in 4/4 time and how they apply to improvisation. This book consists of the following:

  • Chapter 1 demonstrates 3/4 over 4/4
  • Chapter 2 demonstrates 5/8 (5/4) over 4/4
  • Chapter 3 demonstrates 7/8 (7/4) over 4/4,
  • Chapter 4 discusses the displacement of 2/4.

While working through each Chapter, I kept referring back to Plake’s three suggested guidelines or must-do’s if you want to gain a better understanding of polymeter. The most important of these three for me was to practice with a metronome. The metronome helped me hear both meters simultaneously and differentiate each exercise. In addition to the metronome, while working through the e-book, Plake recommends that you should always know where the downbeat of one is in every measure you play, while also recognizing how each polymetric subdivision returns to its starting point.

I would recommend writing these 3 steps down before practicing each chapter to make sure you are getting the most out of the exercises and incorporating the material into your playing.

After completing the e-book, I decided to refer back to Plake’s goals for why he developed the book and see if I was on the right track before I went thru the exercises a second time to see how much I had retained from practicing.

Some of the benefits that Plake listed in his e-book are as follows:

  1. Establish a clear understanding of basic odd-metered subdivision cycles over 4/4, and how these cycles return to their starting point.
  2. Increase your confidence and improve your ability to improvise in odd meters.
  3. Deepen your sense of structure and form as you improvise over chord changes (and other closed-ended forms).
  4. Develop more tools to create tension and release as you improvise, through time, feel and rhythm.
  5. Broaden your rhythmic imagination in both odd and even meters as you improvise.
  6. Discover surprisingly new ways to re-organize the harmonic/melodic materials you already know.
  7. Improve your rhythmic sight reading, and your time.
  8. Fundamentally transform your phraseology when improvising in any idiom.

I noticed progress in regards to #1, #6 and #7. I believe I will achieve the other benefits from this e-book by practicing the exercises and using a metronome more and more.

Conclusion

When I finished Essential Polymeter Studies In 4/4, I would have to agree with Plake that this e-book would be best suited for the intermediate to advanced jazz musician due to the topics discussed and basic knowledge required.

I was overall impressed by how Plake laid out the exercises as well as setup guidelines for practicing the material. The guidelines are essential if you are going to gain a better understanding of polymeter. I know I will continue to work thru this e-book more and more to better understand the topics discussed in each chapter and most importantly incorporate these ideas into my playing.

If you have any question in regards to the book, feel free to check out billplakemusic.org

Essential Polymeter Studies In 4/4

http://billplakemusic.org/my-books/essential-polymeter-studies-in-44/

The post Get more rhythmically out of your playing with Bill Plake’s New E-Book appeared first on Best. Saxophone. Website. Ever..


Stephan Kammerer Mouthpieces vs. The Vintage Heavyweights

$
0
0

Stephan Kammerer Mouthpiecessk symbolIntroduction

The first time I heard of Stephan Kammerer is when I visited KB Saxophone Services in N.Y.C. Kim Bock introduced me to some of Stephan’s prototype hard rubber mouthpieces while I was test playing various SBA’s and Mark VI’s with my Otto Link Slant Signature tenor mouthpiece. I remember playing one of Stephan’s hard rubber tenor mouthpieces which reminded me of a slant link and the alto mouthpiece was reminiscent of a N.Y. Meyer. Overall, I was very impressed by the quality and attention to detail Stephan put into each of his mouthpieces. I asked Kim if I could meet Stephan since he was based in N.Y.C. and Kim was nice enough to arrange a time for me to meet up with Stephan at the shop and discuss his line of mouthpieces.

When I met Stephan, we discussed two mouthpieces that he was working on and once finished, he would send me one tenor and one alto mouthpiece to test play. I am glad to say that although Stephan has gotten busier and busier as a mouthpiece re-facer and as a player in N.Y.C., he was nice enough to send me an Otto Link Super Tone Master (vintage specs) and his SK New York Custom alto mouthpiece. The tenor mouthpiece is a 7* but Stephan has it marked after re-facing it to a 106 and the alto mouthpiece is a .080 tip opening. I will be reviewing each mouthpiece on the following: Sound, Intonation, Response, Build Quality, and my Overall Thoughts.

SK Metal Otto Link Super Tone Master 7* (106.)

sk link

Sound

I have played Otto Link Super Tone Master’s before and overall found that each one responded a bit differently from mouthpiece to mouthpiece (focused, spread, stuffy, free-blowing, bright, dark, etc.). Stephan’s Otto Link Super Tone Master, which he refaced and hand finished to vintage specs was one of the better Otto Links I have played to date. The overall sound of the mouthpiece, I found to be neutral rather than leaning on the brighter or darker side. I found that the sound was even from low Bb to high F# and very easy to control. This Otto Link had the right amount of edge, focus, and warmth that you do not find in all metal Otto Link Super Tone Masters.

Intonation

I have heard from many saxophonists that they find metal mouthpieces to play shrill in the palm keys, and are more difficult to get used to initially when compared to a hard rubber mouthpiece. From test playing more and more mouthpieces from various manufacturers and made from various materials, I do not see this as the case. I would say a metal mouthpiece that has been hand finished and play tested over and over with adjustments should play just as even, in tune, and easy to control as a hard rubber mouthpiece. I found Stephan’s Link to play evenly throughout all of the registers and while working thru my overtone exercises, it took very little time for me to adjust which is not always the case when trying various metal mouthpieces.

Response

The Otto Link Super Tone Master responded well throughout the entire range of the horn. I did find it to contain more resistance or back pressure compared to my Otto Link Slant Signature but this resistance allowed me to project more than my Slant Link. I did find this mouthpiece took more air which could be due to it being a 106 tip opening and I play a 7 or 100 tip opening. When I played chromatically from bottom to top and vice versa, I noticed it was very easy to play from high D to high F# with a full sound that was not shrill and was easy to control.

Build Quality

The rails, tip, and baffle were even, smooth, and balanced on both sides. From my experience, these qualities you do not find all the time when purchasing new Otto Link Super Tone Master’s.

Overall

The vintage Otto Links are some of the most sought after and commonly played mouthpieces on the market today. Unfortunately, the new Otto Link Super Tone Master’s from my experience do not respond and feel like the vintage ones of the past. The SK Otto Link Super Tone Master is a great alternative for someone looking for that “vintage” Otto Link metal mouthpiece or as a back-up to their existing Link. If you are in the market for a metal mouthpiece or searching for the ultimate link, check out a SK Metal Otto Link Super Tone Master mouthpiece or email Stephan for further information.

Sam Dillon test playing the SK Otto Link Super Tone Master Tenor Mouthpiece

https://www.youtube.com/watch?v=kPgeSV32uZg

 SK New York Custom Alto Mouthpiece (.80)

sk alto mouthpiece

Sound

I found the SK New York Custom alto mouthpiece reminded of a N.Y. Meyer. The overall sound I found to be warm, focused, and contain a nice amount of edge in the mid-range, a bright but full sound in the upper range and into the palms keys, as well as a dark and full sound down to low Bb.

Intonation

Although I mainly play tenor, this mouthpiece was very easy to control, stay in tune, and while working thru various overtone series took very little time to adjust which makes it especially great when switching between alto and tenor or vice versa during gigs.

Response

The response was instant with a bit of resistance which really allowed me to project.

Build Quality

The tip, rails, baffle, etc. was clean and even. The finishing work was nice and I noticed no scratches. I liked that Stephan used Zinner blanks because I have tried various mouthpiece facings using Zinner blanks and I believe the material is solid.

Overall

To put it simply, if you are in the market for a N.Y. Meyer alto mouthpiece, I would highly recommend checking out Stephan’s SK New York Custom alto mouthpieces. The sound, response, intonation, and build quality is great and I know Stephan can customize the mouthpiece to your preference.

David Mann presenting the new SK New York Custom Alto Mouthpiece

https://www.youtube.com/watch?v=O6yeQVF9ztY

Conclusion

I would like to thank Stephan Kammerer for sending me his SK Otto Link Super Tone Master tenor mouthpiece (vintage specs) and SK New York Custom alto mouthpiece to test play. With so many mouthpieces on the market today, it can be difficult to figure out which one will suit you best. In addition, there have been many copies and re-releases of popular mouthpiece facing under almost every mouthpiece manufacturer and refacer to date. All I can say is Stephan Kammerer is someone I have added to my list as a quality refacer, as well as a go-to guy if something ever happened to one of my mouthpieces, I know he is someone I could contact to find a great replacement or fix.

Please feel free to send Stephan an email (via his website, link below) with any questions and I highly recommend scheduling an appointment with Stephan at Kim Bock’s shop.

 SK Mouthpiece Website

http://www.skmouthpieces.com/

The post Stephan Kammerer Mouthpieces vs. The Vintage Heavyweights appeared first on Best. Saxophone. Website. Ever..

Can the ReedGeek “Klangbogen” Bore & Reed Stabilizer Instantly Improve Your Sound?

$
0
0

Klangbogen

klangbogen1

Introduction

At the 2016 NAMM show, I stopped by ReedGeek to check out the ReedGeek Black Diamond G4. While at the booth, Mauro Di Gioia, founder and president of ReedGeek, showed me a new device he called the Klangbogen. To gain a better understanding of what the Klangbogen has to offer, I will be discussing the following information: Product Overview, Klangbogen Placement, Test Results, and my Overall Thoughts.

Product Overview

“The ReedGeek® Klangbogen™ is the latest innovative product offering from ReedGeek, Inc., designed by German artisan and ReedGeek team member, Torsten “Toko” Köhler. The Klangbogen; instantly increases output and depth of tone of the saxophone while stabilizing the extreme ranges of the horn so it speaks with clarity.”

This device is a solid brass bow that fits alto, tenor, and baritone saxophone and attaches to the music-lyre screw holder. The Klangbogen will maximize the airflow through the conical tube which improves the efficiency of a balanced reed by supporting and reducing air turbulence at the neck-tenon and palm keys. The neck-tenon and palm keys have historically suffered tremendous nodal disturbances. The overall result is an enhanced tone with greater projection and focus to the sound.

Klangbogen Placement

The post can be unscrewed and re-positioned in one of the three hole placements depending on what type of saxophone you are using (alto, tenor, or baritone).

To install, unscrew lyre screw and insert Klangbogen into lyre slot, tightening the screw securely against the knurled post. The device may be placed below or above the neck screw tenon as seen in picture 3 and picture 4.

Picture 3

klangbogen downside

Picture 4

klangbogenup

Results

I have been using the Klangbogen for over 1 year. I have tried this device on various saxophones and I have noticed the benefit each time. For me, I preferred placing the Klangbogen above the lyre screw holder (see picture 4) but it also worked well below (see picture 3). What I noticed when using the Klangbogen is it did offer me more stabilization, focus, and projection in the upper and lower range of the saxophone. I felt that while playing up in the palm keys, the sound was more stable and easier to control. In the lower register, especially when playing low Bb, I was able to get a bit bigger and fuller low Bb. I will say if you use the Klangbogen for a few hours and then take it off, you will most likely notice a difference.

Overall Thoughts

I am excited that Mauro is constantly developing and experimenting with various products that will correct or improve problems we saxophonist have to deal with on a day to day basis. The Klangbogen will not take a stuffy saxophone or one with neck issues and solve it, but I will say the Klangbogen has only improved the various saxophones I have tried by enhancing and stabilizing various areas on the saxophone. The result is different and can be more noticeable from saxophone to saxophone, but I highly recommend checking one out because everyone whom I have met thus far and has tried the Klangbogen has been happy they did.

The Klangbogen comes in polished brass, sterling silver-plate, and a heavy gold plate.

ReedGeek Website

http://www.ReedGeek.com/klangbogen/

Ricker Keller demo’s Klangbogen

https://www.youtube.com/watch?v=2W3O7gSLlPc

Brian Landrus demo’s Klangbogen

https://www.youtube.com/watch?v=Zv2GUQ4uUJs

The post Can the ReedGeek “Klangbogen” Bore & Reed Stabilizer Instantly Improve Your Sound? appeared first on Best. Saxophone. Website. Ever..

ReedJuvinate: Another option for extending your reed longevity?

$
0
0

ReedJuvinate

reedjuvinate-003

Introduction

I have struggled like many saxophonists to find a good reed. I would say most to all players have bought a box of 5 or 10 reeds and have only found one or two reeds that play well right out of the box. Some methods I have used to improve the overall reed’s responsiveness are as follows: ReedGeek, soaking in water, soaking in apple cider vinegar, soaking in vodka, and the list goes on. When we are lucky enough to find a good reed or work on a reed to where its playing to our standards, the first thing I can assume many of us think to ourselves is “how do I keep this reed alive and playing for as long as possible?”.

My current method to keep my reeds from warping or drying out has been to find an old spice jar or any small plastic or glass bottle, clean it thoroughly and then pour a small amount of vodka at the bottom. I have found this to increase the life of my reeds, sterilize my reeds, and keep them from warping.

I recently received a ReedJuvinate which reminds me very much of what I am currently doing but uses a different liquid (original Listerine) and storage device. I am going to give you an overview of the ReedJuvinate, my results from using the ReedJuvinate, and end with my overall conclusion and recommendations.

Overview

From the manufacturer: “The ReedJuvinate is the woodwind reed storage and conditioning system that keeps your saxophone and clarinet reeds ready to play and free from destructive effects of bacteria, mold and salivary chemicals. The ReedJuvinate preserves your favorite reeds, saving you the cost and hassle of replacing them. It works for all sizes and kinds of reeds.”

Benefits

1.) Reeds last longer; so you save money.

2.) Reeds stay clean and sterile.

3.) Reeds don’t warp and are readily playable.

My Results

I have used the ReedJuvinate over the past couple of weeks and am happy with the overall results. The reeds stayed flat and I did not see any signs of the reed warping. In addition, the reeds absorbed enough of the listerine to keep them clean and playable right away. The ReedJuvinate comes with 2 methods you can use to keep your reeds, whether you want your reeds to be saturated more or less in the Listerine. I have included the 2 step process for you to review:

Steps (2 methods)

A.) Humidify (reeds have lowest water content)

1.) Soak the triangular sponge with full strength Listerine (original formula- yellow in color). Pour off any extra fluid.

2.) Insert your best three reeds into the ReedJuvinate, with the tip down and flat side toward the center of the cylinder. Leave 1 cm of base of the reed exposed you can easily pull it out again. Don’t let the sponge touch the reeds.

3.) Screw the cap on.

4.) Every four weeks, remove the reeds, soak sponge with Fresh Listerine, and replace your reeds.

B.) Soak Humidify (reeds have higher water content)

1.) Insert your best three reeds into the ReedJuvinate, with the tip down and flat side toward the center of the cylinder. Leave 1 cm of base of the reed exposed you can easily pull it out again. Don’t let the sponge touch the reeds.

2.) Fill ReedJuvinate with full strength Listerine (original formula- yellow in color) Screw cap on.

3.) Soak reeds for 10 minutes pour off Listerine leaving the triangle sponge wet. Screw the cap on.

4.) Every four weeks, remove the reeds, soak sponge with Fresh Listerine, and replace your reeds.

Conclusion

I have tried various reed soaking methods whether it be with water, apple cider vinegar, different mouthwashes, and now vodka. I have also tried other products from various manufacturers to keep the reed flat and in an environment that would prevent it from warping or growing any sort of mold or unwanted bacteria. I will say that the results I see when using my old spice jar and vodka method is similar to the results of the ReedJuvinate. I thought that the ReedJuvinate is a much better system for regulating the amount of substance you put in the container which will prevent an instance where the reeds become waterlogged or over saturated. I can say if you currently do not have a method in place to preserve and extend the life of your reeds, I would highly recommend checking out the ReedJuvinate because if you follow the instructions, you will see that your reeds will last longer. If you want your reeds to last longer as well as play to your preference, purchasing a ReedGeek in combination with the ReedJuvinate is one of the best options for getting the playability and consistency out of your reeds.

Please do leave a comment with your reed preparation and preservation methods, as well as any experiences using the ReedJuvinate.

Company Webiste

http://ReedJuvinate.com/

How to use ReedJuvinate

https://www.youtube.com/watch?v=OU5G45GC-ts

The post ReedJuvinate: Another option for extending your reed longevity? appeared first on Best. Saxophone. Website. Ever..

Bravo Reeds: Is this the synthetic reed you have been looking for?

$
0
0

Bravo Reeds

bravoreeds

Introduction

With the various limitations that traditional cane reeds present to saxophonists such as warping, consistency, and longevity. There are more and more manufacturers coming to the market with synthetic alternatives to address these issues. I have tried various synthetic reeds from Legere, Bari, Fiberreed, Forestone, Fibracell, and although I still prefer traditional cane, I am noticing improvements in design, sound quality and consistency with synthetic reeds.

I was recently contacted by Bravo Reeds and was asked to test play their synthetic reeds for alto saxophone. These reeds are also available for tenor, baritone, soprano and bass clarinet.

Product Info

Bravo Reeds were designed in California and made in Taiwan. These synthetic reeds come in traditional cane reed strengths: (2, 2.5, 3, 3.5, 4,). The Bravo Reeds were designed to meet the expectations and demands of professional saxophonist as well as beginners. Through over a decade of research and development as well as trial and error, Bravo Reeds has introduced a reed that feels, plays, and performs as well as cane. Through this process, Bravo has been able to guarantee consistency from reed to reed as well as ensure a non-toxic manufacturing process for workers and musicians. While many synthetic reeds are priced much higher than traditional cane, Bravo Reeds are priced competitively to cane so students and musicians can enjoy the benefits and not have to deal with traditional cane problems.

Research

Musicians at all levels have tolerated the inconsistencies inherent in cane for many years. If you were lucky enough to find one or two reeds out of the box that played well, you would consider that box a great box of reeds. Reed players have searched endlessly for the “perfect” reed, one that is durable, consistent, and responsive. Up until now, the industry has offered cane or synthetic options with each category presenting its own problems.

A solution to the problems faced with traditional cane is a synthetic reed. Manufacturers have been searching for the right combination of plastic epoxy, composites, coverings, and filaments for over fifty years. The problems are threefold: first, there are the structural issues of mouth feel, responsiveness, and resonance; second, there’s the question of the safety of the materials used; and third, there’s price. Good synthetic reeds cost a lot more than cane, making it hard for musicians to justify even trying them out. This is why Bravo Reeds was invented.

Overall Thoughts

I tried various strengths of the Bravo Reeds and found that the 2 and the 21/2 worked best for me. I found the Bravo reeds to overall feel comfortable and not too stiff, but at the same time the Bravo reeds did not feel as comfortable to me as traditional cane. These reeds were responsive and took very little air to make a sound. I found the overall sound quality I was able to achieve had many characteristics of traditional cane, but at the same time, I found that while playing chromatically, the sound quality varied from low to mid to high. I do believe with more and more time using the Bravo Reeds, I could obtain a similar sound as I find when playing traditional cane. However, I still believe like many other synthetic reeds, there is more research and work to be done before synthetic reeds match or surpass traditional cane.

I would like to thank Bravo reeds for sending me their alto reeds to test play. I will say the Bravo reeds offer one of the best values for players looking to switch or try synthetic reeds.

More info on Bravo Reeds:

http://www.bravoreeds.net/

Video Discussing Bravo Reeds

https://www.youtube.com/watch?v=6xc10BvqEIg

The post Bravo Reeds: Is this the synthetic reed you have been looking for? appeared first on Best. Saxophone. Website. Ever..

KB Saxophone Necks – Gimmick or Game Changer?

$
0
0

KB Sax Handcrafted Saxophone Necks

Canyon-1

Introduction

I visited Kim Bock’s shop a few years ago to try out various vintage Selmer and TM custom saxophones as well as gain a better understanding of his repair work since more and more players were going to Kim to have their saxophones overhauled and setup. Recently, Kim has introduced his own line of saxophone necks which of all the saxophone accessories on the market today, (mouthpieces, ligatures, reeds, neck-straps, screws, etc.) there are only a few saxophone neck manufacturers such as: Oleg, Gloger, Paraschos, Warburton, DaCarbo, and Tino Schuct. Since I have not experimented much with saxophone necks, (mainly saxophones, mouthpieces, reeds, neckstraps and ligatures) I was interested in finding out more information about these necks. Kim was nice enough to send me the Redwood and Canyon brass neck which I will be providing a product overview as well as my overall thoughts on each neck.

Product Overview

Kim designed the KB saxophone necks around the resonance, tonal color, and flexibility of the legendary and highly sought after Selmer Super Balanced Action and the early Mark VI saxophones. Each one of Kim Bock’s necks are 100% handcrafted in his shop and are custom fit to a large selection of vintage and modern saxophones. Kim developed and perfected his necks with the feedback from many professional saxophonists from around the world throughout a 1 ½ year prototype period. Throughout this process, Kim recognized the saxophone neck as having the greatest impact on the instruments performance over any other part of the horn. The neck is where most of the sound color, intonation, tonal feel and flexibility are created. Kim has found that by using one of his KB handcrafted saxophone necks, the player will notice a better performance on both modern and vintage horns.

Neck Making Process

The KB saxophone necks are unique to the standard neck making process. How a traditional saxophone neck is made is by “forming a metal sheet around a mandrel to create a conical tube. The tube is then bent over a form to give it the specific shape of a saxophone neck. Some parts of the metal are stretched much more than others during this process which results in a neck with varying wall thickness.” The KB sax necks are made by first stamping out the two halves/sides of the neck and then silver soldering them together to create the neck tube. This results in a neck tube with a much more uniform wall thickness throughout. Kim believes this is part of the reason why his necks sound and feel so resonant compared to other necks on the market. By making each neck by hand, Kim is able to maintain tolerances of +/- 0.002” (thousands of an inch) throughout production which ensures a much higher level of consistency in quality and sound.

Neck Models

kb sax necks

Currently Kim offers two models which are the Redwood and Canyon. The Redwood model does come in copper as well as hand hammered copper while the Canyon model is currently offered in just brass. Below is a description of each model.

Redwood

“The brass Redwood is the most focused of our necks with a dark and round core sound. Your air is channeled into a tight yet robust tone-feel that makes the horn feel quick and compact in the lower range while maintaining the strong and present core sound without changing character as you move through the palm keys and up throughout the altissimo range. It has a hint more resistance than the Redwood copper variations but also stays incredibly centered and round when you really push it.While it is quite focused it maintains great tonal flexibility and a deep complexity to the sound.”

Redwood Copper

“The copper Redwood has a wider, warmer and slightly more free blowing character than its brass equivalent. The sound is a little less mid-tone concentrated and the frequency spread is a more pronounced, punctuated with more highs and lows.It is a softer alloy, so it is more susceptible to damage. Assembling your horn by first putting the mouthpiece on the neck followed by putting the neck on the horn will help prevent neck pull-down. This model has toured the world with pro players and has sustained no damage when cared for responsibly.”

Redwood Hand Hammered Copper

“Hand hammering our copper neck serves two purposes: Firstly, this work hardens the copper, making it less prone to pull-down damage compared to the copper neck. In fact, the hand hammered copper is as strong as brass. Secondly, it gives the neck a unique set of sound characteristics. The tone is more focused than the regular copper neck. While it has an added brightness, it still maintains the flexible yet solid core tone of the Redwood family.”

Canyon

“The Canyon is inspired by the free blowing, full spectrum sound of Selmer’s early Mark VI. It features a wide and slightly spread sound with a deeply resonant tone feel. It is fast responding, has a rich tonal color with that certain “sizzle” or brilliance in the higher frequencies that sprays out in a way that sparkles when you lean into it.”

Review

Before you receive a KB saxophone neck, Kim will ship you tenon receiver measuring gauges. With these gauges, you will measure you model saxophone and provide Kim these measurements so he can make sure that when he sends you a neck, it properly fits your saxophone. In addition to using the tenon receiver measuring gauges, you could also contact your local repairman to get the measurements as well.

When I received the KB Redwood neck, I noticed no blemishes or inconsistencies throughout and the neck reminded me of a SBA style neck. When I began play testing the KB Redwood neck against a Lupifaro tenor neck, I noticed Kim’s description of the Redwood model is exactly what I found as well. The KB Redwood neck was more focused and bit darker than the Lupifaro neck. I found The Redwood neck to play consistent throughout the entire range of the saxophone from soft to loud and also found it very easy to articulate. I did find this neck had a bit more resistance or back-pressure than the Lupifaro neck but this is a characteristic many players who typically play vintage Selmer’s are looking for these days. Compared to the Redwood neck, the Canyon neck embodied the same characteristics as the Redwood but the Canyon neck was more free blowing and was inspired by the characteristics found in the early Mark VI’s. I found the extreme ranges of the horn were big and spread compared to the Redwood that was more focused.

Conclusion

The KB Redwood and Canyon saxophone neck was well constructed and reminded me of the feel and sound I find when playing an SBA or Mark VI. I have not experimented much with various necks due to the limited availability as well as finding a neck that properly fits my saxophone but after play testing one of Kim’s necks, I have now come to realize that experimenting with various necks can have a greater impact on the way the saxophone sounds and feels then I thought. I want to thank Kim for sending me his Redwood and Canyon model necks to test play. Since Kim’s handcrafted necks are $1,180+, I highly recommend going to KB saxophone services website to find out more about the 7 day trial period to see if you notice the difference. I hope this review was beneficial and I would appreciate it if you would leave any comments or questions.

Website

http://www.kbsax.com/kbsax-necks.html

KB Saxophone Neck YouTube Video

https://www.youtube.com/watch?v=mOqEO75DuUs

The post KB Saxophone Necks – Gimmick or Game Changer? appeared first on Best. Saxophone. Website. Ever..

Sax Dakota Straight Tenor and Alto Saxophone “Standing Out From The Crowd”

$
0
0

Sax Dakota Straight Tenor and Alto Saxophone

Introduction

Over the past few years at NAMM, I have seen many saxophonists test play the Sax Dakota Straight tenor and alto saxophone. Due to their popularity at the show, I never had a chance to sit down and test play both saxophones. Recently Peter LaPlaca, owner of SaxDakota, sent me his straight tenor and alto saxophone so I could gain a better understanding of what these horns had to offer. I will be reviewing these saxophones on the following criteria: Appearance, Build Quality, Tone & Response, Action, Intonation, and my overall thoughts & recommendations.

SDTS-1022

sax dakota straight tenor

 

SDAS-1020

sax dakota alto saxophone

Appearance

The Sax Dakota straight tenor and alto saxophone come in a finish called Gray Onyx. When I first saw these saxophones, the body had a finish that reminded me of the Cannonball Raven model and the keys had a matte silver finish which I thought was similar to the Keilwerth SX90R Vintage model saxophone. The black mother of pearl complimented the body and key finish nicely as well as the hand engraved floral design on the neck and bell.

Build Quality

The build quality overall was good. Some of the features of the Sax Dakota straight tenor and alto saxophone are: Pisoni custom pro series pads and resonators, a brass alloy that is made up of 78% copper content, stainless steel rods to minimize travel time, and lock down posts that secure the long rods which prevents them from wobbling and moving out of alignment. While test playing the straight tenor and alto, I saw little to no play between each key and the key heights were comfortable from low Bb to high F#. A feature that I typically see on various bari saxophones and I thought was unique was the 3 part strap system on the tenor and 2 part strap system on the alto. I found this very important when adjusting my neck strap to find a comfortable position when playing both saxophones.

Tone & Response

Both the tenor and alto were quite free blowing and had very little resistance. I found the sound to be much more spread than focused with a timbre that was neither too bright nor too dark. I have read some reviews in the past that describe the sound as nasally which I would agree with but I believe this is due to the bell being straight and further away from you. I found that it took more time to adjust to where the sound was coming from initially but, the overall timbre and complexity of the sound I would recommend comparing to your current setup to hear the overall difference.

Action

The action felt fine. I found the spring tension to be even through-out and not stiff. It felt just like playing a traditional tenor or alto saxophone. I personally would have a few keys built up with cork or epoxy for more comfort and ease.

Intonation

I found the intonation to play well through-out but did need to invest more time when playing up in the palm keys and into the altissimo.

Overall Thoughts & Recommendations

I had a great time test playing the Sax Dakota straight tenor and alto saxophone. I found both the tenor and alto played well and the setup felt comfortable. I would recommend anyone who is interested in the Sax Dakota straight tenor or alto to test play one against your current alto or tenor because although ergonomically it would be easy to get used to, sonically, you are going to have to decide whether you like the sound or not. I see the straight tenor and alto as a saxophone that would let you stand out from the crowd because there are not many players at the moment touring with them and they are truly unique. From a transportation standpoint, you would have to check both saxophones and could not place them in the overhead bin. My recommendation would be to have a custom case made because the standard case that comes with the tenor and alto is very nice but I do not believe will hold up very well from a lot of domestic and international travel. All in all, I would like to thank Pete for sending me the Sax Dakota straight tenor and alto saxophone to test play and hope to hear from those who have played them.

YouTube Links

Kenny Garrett playing a straight alto saxophone

https://www.youtube.com/watch?v=SjBUNyFKkJI

Charles McNeal playing both Sax Dakota straight tenor and alto saxphone

https://www.youtube.com/watch?v=i8IOLKFPqrw

SaxDakota Website

http://www.saxdakota.com/products.html

The post Sax Dakota Straight Tenor and Alto Saxophone “Standing Out From The Crowd” appeared first on Best. Saxophone. Website. Ever..

Theo Wanne Slant Sig “The Missing Link?”

$
0
0

Slant_Sig_Tenor

 

Introduction

I have been playing on an old Slant link for quite some time and have tried various manufacturers versions of an old slant link or early Babbitt mouthpiece to find one that played the same or better than mine. With Theo Wanne’s  various mouthpiece models to meet every player’s needs, I was excited to see that he decided to introduce his version of two of the most sought after mouthpieces on the market today; the Meyer Bro’s New York and the Otto Link Slant Signature. I will be reviewing Theo Wanne’s Slant Sig mouthpiece and comparing it to my original Slant Link mouthpiece. I will be providing a product overview and reviewing Theo’s Slant Sig mouthpiece based on its sound, intonation, quality and my overall thoughts.

Product Overview

While developing Theo’s Slant Sig mouthpiece, Theo utilized and incorporated the “best design principles form the first slant signatures models in the early 1950’s through the early Babbitt models in the 1970’s.” Theo’s Slant Sig mouthpiece features a large chamber and roll-over baffle with perfect side and tip rails, and utilizes Harry Hartmann’s Fiberrod material which sounds and looks like vintage hard rubber but does not discolor or smell like hard rubber when exposed to heat and the sun. The Theo Wanne Slant Sig currently comes in a 7* and 8 tip opening.

Sound

Compared to my original slant link, the Theo Wanne Slant Sig mouthpiece I found to lean towards the darker side and play incredibly clean. From low Bb to high F# this mouthpiece projected well and was quite free blowing through-out the entire range and even into the altissimo. Compared to my Slant Link which I found contained more edge and timbre to the sound, the Theo Wanne Slant Sig had a well-balanced sound through-out and where it lacked a bit in edge in my opinion, it made up for in the clarity of each note which I did not find as easy to achieve on my vintage slant link.

Intonation

The Theo Wanne Slant Sig took very little time to adjust to and the intonation was great while working thru various overtone series.

Quality

I found the Fiberrod material to respond and feel just like hard rubber. The table, side and tip rails were clean and even. I did not see any marks or imperfections on this mouthpiece.

Overall Thoughts

I was overall impressed with the characteristics the Theo Wanne Slant Sig had to offer. Compared to my vintage slant link, I found the Theo Wanne Slant Sig played a bit darker, contained more clarity in the sound, was quite free blowing, and had a bit less edge when pushed. Although the 7* tip opening felt fine, I would like to try a 7 tip opening if it is offered in the future. The Theo Wanne Slant Sig is currently priced at $325 which is a far more cost effective option to a vintage slant link. I overall still prefer my Otto Link Slant Signature mouthpiece but do see this mouthpiece as a viable back up mouthpiece for me. I want to thank Bryan Vance at Theo Wanne for sending me the Theo Wanne Slant Sig to test play and would recommend adding the Theo Wanne Slant Sig mouthpiece to your list of hard rubber mouthpieces to try out.

Link

http://store.theowanne.com/products/slant-sig-tenor-saxophone-mouthpiece

The post Theo Wanne Slant Sig “The Missing Link?” appeared first on Best. Saxophone. Website. Ever..


Forestone’s Newest Products to hit the market

$
0
0

Forestone’s Hinoki Reeds and Mouthpiece Patches

Introduction

Forestone continues to research, develop, and improve upon their existing product line. Recently, Forestone introduced a new synthetic reed called “Hinoki”. The Forestone “Hinoki”reed is a jazz cut hybrid that unlike the black bamboo model, comes in an ivory color that more resembles traditional cane. Forestone was nice enough to send me a Medium and Medium Hard strength for both alto and tenor to play test. In addition to reviewing the “Hinoki” reed, I will also be reviewing Forestone’s saxophone mouthpiece patches.

Forestone’s Hinoki Reed

Frankfurt-Forestone_hinoki-small_2

Product Overview

According to Forestone, this reed has an even richer tonal color and response compared to their traditional series. Similar to the traditional, un-filed, and black bamboo series, the Forestone Hinoki reeds are durable and unaffected by the influences of temperature, humidity and dehydration.

Overall Thoughts

I have tried the Forestone traditional, un-filed, and black bamboo reeds in the hopes of finding a cut and strength that I prefer over traditional cane reeds. The Hinoki reed compared to the other three cuts, I found to play more similar to a traditional jazz cut cane reed. I do believe that a MediumSoft or Soft would had better suited me compared to the Medium which I felt was a bit resistant and the Medium Hard which was simply too hard from what I am used to playing. I found that the overall sound was full through-out the entire range of horn. From my experience, I found the upper register and lower register to have the same sonic characteristics as traditional cane but I still find the mid-range is missing some of the tonal colors compared to traditional cane. I do believe the Hinoki reed is a move in the right direction and an improvement from the other cuts. I still believe that synthetic reeds have not surpassed traditional cane sonically as well as feel but other players beg to differ. I understand that many players use and enjoy synthetic reeds and I do see the benefits as well as will use synthetic reeds to practice. I will continue to search for a synthetic reed that I enjoy playing on as much as cane and the Hinoki is on my list to continue to play test and try different reed strengths. My recommendation is when trying a synthetic reed, you have to play on it for a couple of days to get used to it so be patient.

Forestone Saxophone Mouthpiece Patches

forestone mouthpiece patches

Product Overview

One of the newest accessories that Forestone has added to its product line is their saxophone mouthpiece patches. Forestone saxophone mouthpiece patches are self-adhesive with no glue residues after usage. These mouthpiece patches use a different type of material that is easy to remove and has a more natural feel than rubber.

Overall Thoughts

I believe it’s important to use a mouthpiece patch on every mouthpiece to avoid teeth marks which will help increase the longevity of your mouthpiece and help avoid future repairs. I have used the Vandoren, Runyon, and D’Addario mouthpiece patches. I find the Forestone mouthpiece patch is very similar to these other mouthpiece patches. The Forestone mouthpiece patch is easy to remove and can be transferred to another mouthpiece easily.

Conclusion

After having tried Forestone’s various reeds, saxophones, and accessories, I can confidently say that the new Hinoki reed and saxophone mouthpiece patches are another great addition to the Forestone line of products. The Forestone team is constantly working to not just introduce new products but also work to revamp existing products to make them even better. I highly recommend checking out Forestone’s line of products and please let me know what you think.

Company Website

http://www.forestone-japan.com/index.php/forestone-hinoki-tenor.html

YouTube Video

https://www.youtube.com/watch?v=GrEGJw1jt8s

The post Forestone’s Newest Products to hit the market appeared first on Best. Saxophone. Website. Ever..

Vandoren V21 Saxophone Reeds “The New Standard For Classical”

$
0
0

Vandoren V21 Saxophone Reeds

v21

Introduction

I have played on almost every type of Vandoren reed on the market today except for the V12’s. Currently, the Vandoren Java Red box 2.5 has become my favorite cut as mentioned in my Vandoren Product Overview(Vandoren Product Review). Since Vandoren has released the V21 reeds for alto and tenor saxophone, I was interested to see how the V21 line was different from the Traditional, Java, V16, ZZ, and Java-Red line.

Product Overview

Due to the popularity of the V21 reeds for clarinet, Vandoren decided to expand this line to the alto and tenor saxophone with reed strengths starting at 2.5 and going up to 5.0. The V21 utilizes a unique conical design which Vandoren and players found provided a dark, focused, and full-bodied response throughout the entire range of the saxophone and even into the altissimo. Vandoren Product Specialist Michael Fenoglio, see’s the V21 line suited for musicians who are “looking for something darker than traditional reeds but with slightly less resistance than V12’s.”

Review

Since I typically play on either 2.5 or 3 strength reeds from Vandoren depending on the cut, I decided to try out a box of 2.5 strength V21 reeds for tenor saxophone (see reed comparison index below for further detail). I found the 2.5 V21 reeds to play on the harder side and actually used a ReedGeek to shave a few of them down but I was pleased to see no flaws or imperfections in each reed. I did find these reeds compared to the traditional Vandoren Blue Box to play darker as well as were very clean and focused without any edge. I found it was very easy to articulate on the V21 reeds and the consistency from low Bb up even into the altissimo was very good.

Conclusion

Although the V21 reed is tailored towards the classical musician, I believe some saxophonist primarily focused on jazz would enjoy this reed as well. After trying the Vandoren V21 saxophone reeds, I still prefer the Java Red, V16, and ZZ reeds due to the edge, play ability and core these lines have to offer. With that said, if you are currently playing on the Vandoren Traditional Blue Box, I believe you will enjoy the Vandoren V21 reeds as having a more complex and darker sound that is easy to control and articulate. If you are currently using the Vandoren V21 saxophone reeds, please leave a comment below with your thoughts.

Web Link

https://www.youtube.com/watch?v=YpMf4r-6Ago

Reed Comparison Chart

reed comparison chart

The post Vandoren V21 Saxophone Reeds “The New Standard For Classical” appeared first on Best. Saxophone. Website. Ever..

Was It A Mistake to Sell My Mark VI?

$
0
0

(Originally titled, “The Sound, The Trane, and All The Rest”)

Photo courtesty of daisy.r

Photo courtesy of daisy.r

I’d played a Selmer Paris Mark VI tenor since 1975, when my teacher and I hand selected it from among a half-dozen other examples at the legendary Charles Ponte Music on New York City’s 48th Street. I’d performed and recorded with it on the Jersey Shore, in Manhattan, and Nashville, playing everything from Chicago Transit Authority, to funk and disco, to hard rock, to a bit of jazz. I loved my Mark VI, and despite having been manufactured during the model’s last year, it was a very good example. It had The Sound- the fuzzy lushness of Stan Getz. But, it could also produce the enormity and directness of Clarence Clemons. So, why do I speak of it in the past tense? Because I found something better, at least for me.

I’m not even sure how this process even began. A few months ago, I noticed that the horn was missing its lyre screw. Though I can assure you that I had no plans of marching with it anytime soon, I had the genuine part ordered from Selmer- I loved the instrument that much. And, like thousands of other saxophonists, I was caught up in, and proud of being part of the MK VI mystique and history.

After a decade of barely playing at all, feeling as if my soul connection to it had been broken forever, last summer I’d been deeply inspired by a local, young hard bop sax player to return to playing, and have, for the past eleven months, been fully committed to becoming the best player I can be. This personal renaissance included shopping for a terrific new mouthpiece (Eric Falcon’s MacSax FJ-IV 8*) and availing myself of the many wonderful educational resources available on today’s World Wide Web.

Along with listening, practicing, and studying, I’d occasionally lust over ads for new instruments, becoming enamored with the vintage and raw finishes available from several makers. Sadly, as a brash young rocker who rarely benefitted from quality monitor systems, I’d scratched the heck out of the Selmer’s shiny finish on many a microphone, in an effort to hear myself better. And, though it was in excellent playing condition, the years of sweat and acid had eaten away at half of its lacquer. I wondered what, if anything a new instrument might bring to my playing, and one saxophone in particular called to me- the Andreas Eastman 52nd Street tenor. I loved its unlacquered finish and the 1940s-inspired engraving, and was impressed by some great reviews and its adoption by Bob Mintzer. Thinking I’d never have the opportunity to play one and compare it with my instrument, I reread this website’s Fourteen Sax Shops You Should Visit Before You Die and was delighted to see Chuck Levin’s Washington Music Center listed (www.chucklevins.com), which was only four and a half-hours’ drive from home!

I contacted Levin’s woodwind expert to arrange a meeting. Nii Akwei Adoteye (http://11thhourmusic.com) is an absolutely delightful, young alto and soprano man who was invaluable as an honest and impartial listener. Over the course of five hours, Nii Akwei lent me his expert ear and caring nature, and I had an absolutely wonderful time with him, talking about saxophones, jazz music, and life. Although I only got to glance around Levin’s other departments, it was clear that it was a proverbial candy store for players of all instruments. And, apparently, although a standalone mom and pop shop, Levin’s competes with, and often beats the pricing and service of the web-based monolithic music shops.

We began with the object of my desire- the 52nd Street tenor. I was immediately disappointed in its finish. In person, it looked very different from the way it did in photographs. Rather than the look of unlaquered brass, it appeared as if it were spray painted with semi-gloss, gold enamel. Also, the shallow, line-style engraving of the vintage coupe under the old street lamp and sign looked much less appealing to me than it did in pictures. Still, I played it. After all- that’s what matters most. I was unimpressed with the Eastman. It wasn’t a bad horn, but there was nothing special about it. It felt OK. It sounded OK. It performed OK. But for me, it was totally forgettable.

Next was the Yaginasawa T-991. Having read many great reviews of ‘Yags’ over the years, and despite its beautiful high-gloss lacquer (recall that I wanted something raw), I was eager to try it. Its fine workmanship was clearly evident, but like the Eastman, I felt that it was just there. Neither instrument had the beautiful Selmer sound or offered any advantages to my playing.

Before we continue, let me clarify a couple of things. Despite my love of the Mark VI, I’d always had two issues with it- one down low, and the other up high. I’d always found it progressively resistant, beginning with a somewhat gurgly low D. A special effort was needed to pop out low B and Bb, and even when warm and subtoning well; my results at the lowest end of the range could be inconsistent. Although I’d finally been victorious with the altissimo range beyond F#, I’d found G and G# to be resistant as well.

It’s my opinion that part of the beautiful Selmer tone is based on resistance. I’m not an expert, but I’m not sure you can achieve that wonderful fuzziness in a horn that’s very free-blowing. For forty years, I viewed this as an equitable tradeoff for the terrific tone I’ve always been complimented on. Now, as a reborn player, and one intent on improving my jazz chops, I’d hoped that there was something a bit more responsive. Thus far, that didn’t seem to be the case. I found neither the Eastman, nor the Yaginasawa any more free-blowing than my horn, neither down low or up high.

Next came an Austrian Schagerl T1-VB, a brand I was unfamiliar with until Nii Akwei suggested it. The T1-VB, as opposed to brass, is made of bronze that’s raw and unlacquered. Replete with a really nice floral engraving- I absolutely loved the look of it! If it’s still a secret, I admit that I’m certainly an artful person who values aesthetics. Nicely constructed, the Schagerl played and sounded fine, but again, had no special attributes for me, and it felt really heavy around my neck.

Nii Akwei then brought out two new Selmer Reference 54s, the modern-day version of the Mark VI. They were good looking, and in a shape that I wish I’d had the maturity at 20 years of age to have worked to maintain in my own Selmer. I also own an absolutely brilliant Selmer Paris 10B Bb clarinet. In fact, my former teacher- the late, great Kenny Davern (who’d been on the board of Buffet Crampon) felt that mine equaled the best Buffets. So, it and the Mark VI, along with my predisposition to Francophilia, had rendered me somewhat of a Selmer Sycophant. I found both 54s to possess the magical Selmer sound, though neither matched the beauty of my ’74. And, while mine has the typical, less-than-perfect Selmer intonation over the full range, the intonation of both the new ones was significantly poorer. I also found both to be equally as resistant as my horn. At nearly $8,500, the Reference 54 was roughly double the price of the other tenors, and I did not feel called to spend that amount of money- relieved that the Selmers didn’t outperform my horn in any way.

Feeling disheartened, we moved on to Yamaha. I’d began on a Yamaha student tenor, alto, and flute at 15 years of age, so I was hesitant to ‘go backwards.’ Nii Akwei took a Yamaha YTS-82ZII (Custom Z) that had just arrived that morning out of the case for me. It had a beautiful, lacquered finish (again, not what I’d had in mind) and a particularly lovely, floral engraving. It was noticeably lighter than any of the other tenors I’d tried, including mine, and it felt great around my neck, as well as under my fingers.

If the Mark VI is Getz, the Custom Z is Trane. While it doesn’t have the inherent smoky warmth of the Selmer Paris, the Z has a no-nonsense, Coltrane-esque beauty. Not cold, but very direct, and warm enough to be appealing. And it has a fairly big sound- nearly as big as you want it to be, or just as mellow too. I was blown away by the 2016 Yamaha Custom Z. Using a tuner to corroborate my impression, the intonation is good. It is without equal, the most free-blowing tenor I’ve ever played. The low end is effortless. I could subtone down to Bb at pianissimo, even with my open 8* metal mouthpiece. The altissimo G and G# also spoke very cleanly, with no effort at all.

Nii Akwei and I thought we’d try an experiment and switch necks between my Selmer and the Z. While neither of us heard any appreciable affect on the sound of either horn, it did demonstrate something impressive. Turns out, that the Z’s octave key couldn’t open the vent of the Selmer neck- I didn’t need it. We were both amazed as I went from low Bb to altissimo G without opening the octave vent. I don’t think I was even aware of having to change my throat voicing.

While I’ll work to get a bit more ‘Selmer’ into my sound going forward, I had to have this instrument. The Custom Z is the most responsive and even-tempered saxophone that I’ve ever played. I put it on lay-away, and was fortunate enough to sell my beloved Mark VI two days later. While I had a few bouts with sentimentality as I prepared to pass it on to its grateful new owner, there were few regrets. I knew that I’d made the right decision. If I possessed the ‘collector’s gene’ and wasn’t a rabid minimalist, I would have kept the Mark VI. But I’m a different player, and a different person now, and I’m excited to be starting over with a clean slate.

I also tried the Yamaha YTS-875EX (Custom EX) but much preferred the Z. Granted, it was late in the day and I’d already made my decision, but for some odd reason, I was making a lot of split tones on the EX. While you may find conflicting comparisons between the two Yamaha pro horns, the Custom EX is physically heavier and therefore darker-toned than the Z, and both get excellent reviews.

I had forty good years with The Sound. I couldn’t wait to get down to serious sheddin’ with The Trane. And as for The Rest, well, there are obviously many playable and affordable saxes out there today. I would like to have tried a P. Mauriat, a Viking, a Trevor James, and perhaps one or two others, But, for those that I did play, there was only one for me, and I strongly suspect that this would have remained the case, even if I’d played everything else available today. While it’s highly unlikely that I have another forty years of playing ahead of me, I can’t wait to make all of the music I can with the Yamaha YTS-82ZII Custom Z.

Postscript: I currently have about two months in with the Z. While upon first play after its arrival, I experienced some seller’s remorse, my ears are making peace with the different sound of the horn, and I’ve found that using a reed of sufficient resistance will indeed produce a lovely Getz sound. While not at all resistant, I find the upper stack a bit repressed, as compared with the big MK VI sound, and the upper palm key notes (D-E-F) tend to be sharp (perhaps a trip to Curt Altarac’s MusicMedic in the future). But overall, the Z has a fabulous tone, is eminently playable and even, with a wonderful low-end and easy altissimo.

The Yamaha ‘V1’ neck takes a decidedly upward curve at the mouthpiece end which took me a bit of time to get used to, as it renders a noticeably different playing angle and feel than the Mark VI. Whether or not this was changed in the future, I think any horn, this one included, would benefit from a (Wanne-style) multiple strap hook to give the player a variety of angles.

Lastly, and this is significant- this Yamaha’s pads are sticky. Searching the web, it appears that the culprit may be a protective pad sealant. Soliciting input from Tim Glesmann of Sax Alley, while I continued to swab at the end of each session, I stopped leaving the HW Pad-Saver in as the horn sits on its stand overnight. While the Pad-Saver can serve well as a secondary swab, it may retain more moisture than it removes when left inside the body. Despite Levin’s backing-off some of the pivot screws, the low C#, and especially, the G# keys continued to be a problem. When the horn was warm and moist, the G# would stick to the tone hole in real-time! Neither powder paper, cigarette paper, sandpaper, or naptha helped. Only a bit of valve oil on the pad finally provided relief. Tim Glesmann, a major Yamaha dealer himself, told me that they chemically strip Yamaha pads in an aggressive two-step process when they set-up a new horn. I can only speak for one horn, but this issue has been very significant.

As to finally answer the question posed by the title of this article and not to end on a sour note (like a G when you finger a G#!), The Custom Z is an overall huge winner, which gets the top vote of several Yamaha dealers who carry it along with the horns of several other fine makers. I love it more each day.

The post Was It A Mistake to Sell My Mark VI? appeared first on Best. Saxophone. Website. Ever..

Can a Thumb Hook Really Affect Your Sound?

$
0
0

Introduction

I have seen new accessories hitting the market to address or improve upon specific areas on the saxophone that are seen to be lacking resonance or feel not as comfortable when playing. Some of these after-market accessories are neck screws, thumb rests, necks, and thumb hooks just to name a few. The thumb hook in particular is getting more and more buzz around it. At first, I thought what could a thumb hook possibly add or do to the saxophone besides adding additional comfort or aesthetic. I recently received 2 thumb hooks from Tino Schucht who is known for his after-market necks that are based on the Balanced Action, Super Balanced Action, and Mark VI necks. I will be giving you an overview of  the Tino Schucht Dirty Punch and Gentle Touch Thumb hooks as well as provide my review and overall thoughts.

Product Overview

Dirty Punch

DP Tino

According to Tino, his Dirty Punch model “produces a dirty, rough and explosive sound with a very good response, core and dynamics levels suitable for any music style. This thumb hook is designed for Selmer, Yanagisawa, Keilwerth, and Yamaha saxophones thumb hooks across the saxophone family (soprano, alto, tenor, and baritone saxophone). The thumb hook is made out of brass that has been untreated which gives it an old or vintage finish. Each thumb hook is polished and comes either in brass, silver plated, or gold plated.

Gentle Touch

Gentle Touch Tino

According to Tino, his Gentle Touch model “produces a smooth, dark, warm and deep sound with a very good response, core and dynamics levels suitable for any music style. This thumb hook is designed for Selmer, Yanagisawa, Keilwerth, and Yamaha saxophones across the saxophone family (soprano, alto, tenor, and baritone saxophone). The thumb hook is made out of brass that has been untreated which gives it an old or vintage finish. Each thumb hook is polished and comes either in brass, silver plated, or gold plated.

Review

I compared the Dirty Punch and Gentle Touch to the standard metal thumb hook on a Lupifaro Platinum tenor. I first started with the Gentle Touch and noticed that sonically the sound was less edgy and more mellow with clean clarity and projection. I found the standard metal thumb hook to resonant more but the Gentle Touch per Tino’s description did offer a mellower tone when sub-toning and playing softly which was noticeable with the Gentle Touch. When I tried the Dirty Punch in comparison to the standard metal thumb hook and Gentle Touch, I noticed the sound was edgier, darker, and fuller as well as the response was more immediate with less air. From a comfort-ability standpoint, I found the Tino Schucht Gentle Touch and Dirty Punch to be a more comfortable and both were easy to take on/off and adjust.

Overall Thoughts

Per David Liebman ” Tino has for years been experimenting with the effect of thumb rests on the sound and to be honest there IS a difference using his hooks. You have to try it because it wouldn’t seem on paper to make a  difference but it definitely helps the sound.” Besides mouthpieces, saxophones, ligatures, and reeds, I do not experiment much with thumb hooks. I did find that both the Dirty Punch and Gentle Touch Tino Schucht thumb hooks were very comfortable and made a difference in the sound. Sonically, I did notice a difference between the Dirty Punch, Gentle Touch and standard thumb hook for how the horn sounded and responded throughout. I know many of you think the thumb hook is there for you to simply rest you right thumb and I initially would agree, but since trying the Tino’s thumb hooks, I was pleasantly surprised by how they had an impact on the sound. Now, please keep in mind, I believe the results for this thumb hook is dependent on your current setup so every player will have a different re-action to the effect’s of Tino’s thumb hooks, which I believe will be positive. I highly recommend you try one to see how your saxophone responds and sounds in comparison to your standard brass or rubber thumb hook. I would like to thank Tino Schucht for sending me his thumb hooks to test play and would greatly appreciate any feedback from those of you that have had a chance to try Tino Schucht’s thumb hooks. I am interested to  hear other players results.

Links

Website

http://www.schuchtsaxtechnology.com/

Thumb Hooks

http://www.schuchtsaxtechnology.com/thumb_hooks/thumb_hooks.html

 

The post Can a Thumb Hook Really Affect Your Sound? appeared first on Best. Saxophone. Website. Ever..

The A.L.E Reed Balancer. Does it Work?

$
0
0

ALE Reed Balancer

Introduction

With musicians continued frustration around the consistency of cane reeds from brand to brand, there have been more reed tools hitting the market designed to help address this common issue. In the past, I had tried sand paper, reed rush, and a reed knife to try and correct various reeds that either played too hard or were not sealing well with my mouthpiece. Recently, I was contacted by Marti Giaimo regarding his A.L.E Reed Balancer tool. I will be providing a product overview as well as my overall thoughts.

Product Overview

The A.L.E. reed balancer is a small and lightweight piece of steel with a slight rough edge at the tip which can be used to improve the performance and play-ability of natural woodwind reeds. The reed balancer is easy to transport, safe, and designed for beginners, intermediate, and professional players. Each reed balancer comes with a lifetime guarantee on materials and workmanship and can be used on single and double reeds. I have included directions on how to use this tool as well as the link to a video demonstration by Marti Giaimo below.

Directions

“Place the Reed Balancer at a 45 degree angle. Resurface the back of the reed (clarinet or saxophone), by starting at the heel of the reed. Drag the Reed Balancer across the reed, in the direction of the grain, usually, two or three passes is sufficient to flatten the back of the reed so it will “sit” properly on the bed of the mouthpiece. Play the reed. If one of the rails of the reed doesn’t “speak” as freely as the other, take the Reed Balancer and drag it across the intended corner edge as follows. If it is the right trail, drag the Reed Balancer once or twice, in a North-Easterly direction, avoiding the “heart” (center) of the reed. If it is the left rail drag the Reed Balancer in a North-Westerly direction, once or twice, avoiding the “heart” (center) of the reed.”

A.L.E Reed Balancer Demonstration Video

Overall Thoughts

I have been using the original ReedGeek Classic tool to work on all of my reeds and decided to compare it to the A.L.E Reed Balancer as a point of reference. The A.L.E Reed Balancer is a very simple and lightweight tool which I used to flatten the back of my reed so it sat flat on the table and sealed with my mouthpiece. I found this tool is most effective by the recommended 45 degree angle when removing cane from the top and bottom of the reed. In comparison to my ReedGeek Classic, the A.L.E Reed Balancer was best used to remove some cane off the back and front of the reed. When it came to focusing on the left and right corner of the reed so to not effect the heart, The ReedGeek Classic had various features built into the tool which made it easier to use. In my opinion, I see the A.L.E. Reed Balancer as a great tool for students who want to begin working on their reeds and simply flatten the bottom and take some cane off the top. The A.L.E Reed Balancer would also work for intermediate and professional musicians but I believe the ReedGeek Classic allows you to balance the reed even further from multiple angles without taking too much cane off the reed. Overall, the A.L.E. reed balancer does remove cane off the reed easily and is especially safe to use. I believe with any of these tools, becoming educated on the various ways to remove cane and practicing with the tool will best help you understand what steps you need to take to make your reeds play better. I would like to thank Marti Giaimo for allowing me to test out his A.L.E. Reed Balancer tool.

What tool or routine do you use to best improve your reeds?

Website

http://reedbalancer.com/

The post The A.L.E Reed Balancer. Does it Work? appeared first on Best. Saxophone. Website. Ever..

Corry Bros. “Tone Tablet” Can such a small piece of equipment make a difference?

$
0
0

tone-tablet-with-mark-vi

Introduction

I was recently contacted by Paul Corry who designs and manufactures his own line of mouthpieces and asked me to review one of his new pieces of equipment I had never seen before called the Tone Tablet. Now I have seen various neck screws as well as the Klangbogen (BSWE Klangbogen Review), which were designed to address the neck-tenon and palm keys which have historically suffered tremendous nodal disturbances. These products to various degrees will improve the overall airflow resulting in a better resonance and projection. I currently use the Klangbogen on my tenor and alto and do notice a more even scale so I was excited to see another product on the market designed to address this area on the saxophone. I will be providing a product overview as well as my overall thoughts.

Product Overview

“The Corry Bros. Tone Tablet was created to help optimize the tonal output of your saxophone. The tone tablet is made from specially sourced Silver Bullion which has the same qualities and working properties as sterling silver. This simple, discreet and non-intrusive silver tablet is simply placed into the lyre hole on your neck tenon and held in place once the lyre screw is tightened. By replacing mass lost in the lyre hole, the entire neck tenon vibrates more efficiently and consequently so does your horn. The overall sound will feel more centered, stable, and richer in all registers. The tone tablet does not replace any part on the saxophone so you can use your original neck screw or after-market neck screw. The tone tablet can stay in place and can be removed easily.”

To review test results and pro’s thoughts after testing the tone tablet, click the link below:

Tone Tablet Test Results and Reviews

The tone tablet will soon be offered in gold, nickel silver, and brass finishes.

Overall Thoughts

I have seen various after-market neck screws offered by Meridian Winds, Ishimori, and WestCoast Sax and a tone enhancer or stabilizer offered by Lefreque as well as ReedGeek known as the Klangbogen (currently using). I have not had a chance to try all of these products but since using the Klangbogen, I began to realize that there is not necessarily an issue but an opportunity to improve the overall sound and playability of the saxophone. This can be done by addressing this area on the saxophone which seems to commonly have nodal disturbances resulting in a saxophone that does not play as evenly and full as it could. I test played my saxophone with and without the tone tablet back and forth for over a week to see if I noticed a difference in my sound, how the horn responded, and the overall evenness from top to bottom. I have to say that overall while using the tone tablet, I did notice a difference in the overall response from top to bottom. I found my saxophone with the tone tablet to respond a bit faster, the overall sound from my perspective was a bit louder and projected further. It was quite surprising to think that such a small piece of equipment could have an effect on the sound and response. Although I still like using the Klangbogen by ReedGeek, the tone tablet is a great piece of equipment I recommend players check out and see what impact it has on their saxophone. Whether you prefer an after-market neckscrew, the lefreque, Klangbogen, or now tone tablet, I believe you will come to realize that these pieces of equipment can help your saxophone perform better. I would like to thank Paul Corry for introducing me to his Tone Tablet and am looking forward to checking out his mouthpieces in the future.

Website

http://www.corrybros.com/

The post Corry Bros. “Tone Tablet” Can such a small piece of equipment make a difference? appeared first on Best. Saxophone. Website. Ever..

Vandoren’s New V16 A5S+ and A6S+ Hard Rubber Alto Mouthpiece

$
0
0

vandoren

Introduction

I have and still play on Vandoren products from reeds to mouthpieces to ligatures, and the list goes on. In the past, I had reviewed Vandoren’s line of products (Vandoren Product Review) and one of those products was the Vandoren V16 tenor and alto saxophone mouthpieces. Recently, Vandoren introduced the V16 S+ mouthpieces for alto saxophone which is the next evolution for the V16 line of mouthpieces. Michael Fenoglio, product specialist at Vandoren, was nice enough to send me a V16 A5 S+ and A6 S+ to test play. I will be providing a product overview as well as my thoughts on both the V16 A5 S+ and A6 S+ sound, response, tuning, and projection.

Product Overview

“Vandoren is proud to release the next version of the V16 alto mouthpiece, the S+ chamber. The newly designed S+ chamber optimizes airflow which allows players to use more air than typical small chamber mouthpieces, creating a sound with more body, depth, and flexibility while maintaining the free-blowing nature of the V16 family. The S+ chamber takes the place of the current alto S series mouthpiece and is available in all V16 alto facings, A5 through A9.” According to Michael Fenoglio, Vandoren Product Specialist, “Jazz alto players of all levels are going to love this mouthpiece.” “The response and tonal flexibility of this mouthpiece rivals anything I’ve ever played on, including highly sought after vintage mouthpieces. It has all the qualities I love about small chamber mouthpieces, but allows me to push more air, almost like a medium chamber piece.

Sound

I currently own a V16 A7 alto mouthpiece and switch between the A7 and either a Meyer or Marmaduke alto mouthpiece from time to time. Sonically, I found the V16 A5 S+ & A6 S+ to have a very focused sound that could be bright when pushed but at the same time maintain a very warm center. The S+ mouthpieces compared to the original V16 mouthpiece I found was more versatile when played at various dynamics and overall a bit warmer. I believe these characteristics are something many players are looking for especially those who are searching for a vintage Meyer mouthpiece.

Response

The response was great. The S+ is a very free blowing and easy to control mouthpiece. Even with this small chamber, I was surprised how much air I could push thru the A5S+ & A6S+ mouthpiece without it cutting out or losing it’s focus.

Tuning

Compared to the original V16 small chamber, I found the V16 S+ was easier to control thru-ought the entire range of the saxophone especially in the palm keys. Since I mainly play tenor, I found the A5S+ amd A6S+ were very easy to switch to and become comfortable right away.

Projection

I actually found my V16 A7 to project a bit more than the A5S+ and A6S+ but the S+ Chamber projected still projected well and would really cut if you were playing lead in a big band.

Overall Thoughts

I personally think the S+ chamber is a great new addition or evolution to the V16 alto saxophone mouthpiece line. I preferred the larger tip opening on the A6S+ over the A5S+ but both mouthpieces were great. If you currently play on the V16 line of mouthpieces and have not tried the S+ chamber, I would highly recommend it. I want to thank Michael Fenoglio for sending me both V16 S+ mouthpieces to try and am hoping they introduce this chamber to the V16 tenor line of mouthpieces very soon.

V16 S+ Mouthpieces

Amazon Link

Website

http://www.dansr.com/uploads/media/Saxophone-Mouthpieces-V16-ebonite.pdf

Baptiste Herbin

Bruce Williams

Steve Wilson

The post Vandoren’s New V16 A5S+ and A6S+ Hard Rubber Alto Mouthpiece appeared first on Best. Saxophone. Website. Ever..


Ochres No. 5 Professional X Series-Vintage “Zen” Model

$
0
0

Introduction

While at last year’s NAMM show (NAMM 2016 Gear Roundup), I had the chance to test play a few new saxophone brands which I had not seen at the 2015 NAMM show. One saxophone manufacturer that stood out to me in particular was Ochres. Today, with many Taiwanese saxophones flooding the market, it has become a bit harder to tell the difference between each brand. Since many of these saxophones are built with similar to the exact same parts, it comes down to attention to detail and setup on the bench to differentiate that saxophone amongst the many competing in this space. I stopped by the Ochres booth due to many players recommending I test play the Ochres No. 5 X Series vintage “Zen” model which from first glance appeared to be Ochres’s “vintage” offering. I will be reviewing this saxophone on the following criteria: Sound, Ergonomics, Finish, and Build Quality. In addition, I will offer my overall thoughts and potential areas for improvement.

Sound

While playing this Ochres tenor saxophone, I found that the sound was incredibly clean. The bottom end smooth down to low Bb but had a little bit of resistance which reminded me of some early 60’s Mark VI tenors I have played in the past. The mid-range was easy to play at various dynamic levels and in the upper range, I found the sound was even when playing into the altissimo range and leaned a bit towards the brighter side of the sound spectrum. The articulation was good on the Ochres No. 5 X Series as well as the intonation was great from top to bottom and even the altissimo range was incredibly in tune which I find is not always the case from first play testing. I did find the overall response and sound to have some complexity and character but would say if you are looking for a very edgy and dark sounding saxophone, you might prefer another one of Ochres models.

Ergonomics

The ergonomics felt good under my fingers. The key action was consistent throughout the horn but I would say the action was a bit tight which I would take to my repairman to make lighter as well as have the key heights a bit lower but that is a personal preference. In regards to the lower stack, I would have the low Eb spring tension lighter so moving from low Eb to C is more fluid as well adjust the pinky table to make it a smoother when playing chromatically from C#, C, B, to low Bb. In the upper stack, the palm keys spacing and cork heights felt good under the left hand but like many saxophones, I recommend having your repairman build any of the palm keys up with cork or putty if needed.

Finish

The Ochres No. 5 X Series vintage “Zen” model has an aged brass patina which reminded me of the Cannonball “Brute” finish but with a lighter color. This finish was achieved by washing the saxophone in a white radish bath to achieve this color and Ochres believes this is a better and safer method than using chemical dyes to achieve this finish. The abalone key touches were nice touch but personally, I believe black or white mother of pearl key touches would make the saxophone stand out a bit more. The hand engraving with the floral design reminded me of various early 5 and 6 digit Mark VI saxophones and the overall work is some of the best I have seen thus far. The gold Ochres stamp placed on the front of the bell is a unique touch and the only other saxophone brand I have seen do something similar is Yanagisawa on their 880 series. Above the octave key there is a stamped or laser engraved statement “1st Grand Prix” as well as on the octave key it states “free your soul”. The “1st Grand Prix” reminds me when Selmer used to engrave Mark VI above the octave key but my overall recommendation would be to remove these 2 statements. One unique feature I have not seen on modern saxophones is the alternate F key is a quite large with a wooden key touch instead of mother of pearl or traditional brass.

Build Quality

I found the overall build quality to be one of the better one’s I have seen coming out of Taiwan. I took the saxophone to a few players and repair techs in the area and all agreed that the setup was much better than they have seen in terms of the following: the tone-holes were even and level across the entire saxophone, the pads were seating well, springs are in place, and finally there was no cover up or blemishes across the saxophone. This saxophone like many professional brands today is setup with: Pisoni pads, metal resonators, blue steel springs, utilizes a one-piece body, and the pads are installed with shellac instead of glue just to name a few. My final observation is the hard shell case that comes with this model should be sturdier. I think the case does not compliment the quality of this saxophone and my recommendation would be to swap out the case with another after-market case if you purchase this saxophone or I recommend Ochres design a flight case as an alternative option or replacement.

Conclusion

After getting a chance to further test play the Ochres No. 5 X Series vintage “Zen” tenor saxophone, I am overall very pleased with how this saxophone performs in comparison with the many Taiwanese saxophones currently on the market. I believe there are areas to improve on this model which will help Ochres stand out from the competition and I am looking forward to visiting their booth at the 2017 NAMM Show.

Ochres Website

http://www.ochresmusic.com/index.php

Ochres Video

 

The post Ochres No. 5 Professional X Series-Vintage “Zen” Model appeared first on Best. Saxophone. Website. Ever..

NAMM 2017 Saxophone Gear Roundup

$
0
0

Introduction

This marks my 6th year attending NAMM (National Association of Music Merchants) and the show keeps getting bigger and better every year. Similar to the 2016 NAMM Show (2016 NAMM Show Saxophone Gear Roundup), the 2017 NAMM show was yet another year filled with more exhibitors showcasing new and updated products including: saxophones, necks, ligatures, mouthpieces, reeds, neck-straps and the list goes on. With only four days to see it all, I tried my best to test play as many products as I possibly could but unfortunately as always, I was not able to meet with every exhibitor that I wanted to see. Overall, I saw more tweaks or enhancements to current products than brand new models being showcased. I will be reviewing and revisiting some products I had a chance to try at the 2016 NAMM show as well as discussing some new products that have recently been launched for 2017. In addition to the reviewed products, I will list products at the show that I hope to test play at a later date as well as recommend you check out.

These products, in no particular order….

Ishimori Wood Stone “New Vintage” Alto Saxophone

I was excited this year to test play the brand new Ishimori Wood Stone “New Vintage” alto saxophone. Since the Ishimori Wood Stone tenors played great at last year’s show, I was excited to see how the alto’s would turn out. I tested played all three finishes which were a gold lacquer, cognac lacquer, and antique finish. The antique finish was the only model without the high F# key and my favorite Ishimori alto at the show. Like the Ishimori Wood Stone tenors, the alto’s played extremely well. The ergonomics were incredibly comfortable and the action was light. Overall, I liked the antique finish sonically because I thought this saxophone had the right amount of resistance, warmth, edge, and projection. This saxophone played very well in tune with an even scale from top to bottom. I find with many modern alto’s, the palm keys voicing is what can differentiate a pretty good professional saxophone and a great professional saxophone and Ishimori really spent some time on his Wood Stone altos because all 3 finishes at the booth played exceptionally well. Some features unique to the Ishimori Wood Stone alto’s are as follows: Wood Stone Neck, Wood Stone lyre screw set, right and left Wood Stone thumb hook, two point mounting brace, nickel silver neck socket and reinforced rods just to name a few. I hope to test play the Ishimori Wood Stone alto’s in the very near future and wanted to thank the Ishimori team for being so helpful at their booth.

http://newvintagesax.com/index.html

Nadir Carbon Fiber MBII and SKY Mouthpiece & Harry Hartmann’s Fiberreed

Since checking out Nadir’s mouthpieces and Harry Hartmann’s Fiberreed at the 2015 NAMM show (2015 NAMM Show: Part 2), I decided to stop by the booth and see if there were any new or updated products for 2017. The two new products I test played from Nadir were the new carbon fiber Sky and MBII model tenor mouthpieces as well as Harry Hartmann’s new Carbon Onyx Fiberreed. I have seen more manufacturers utilizing this carbon fiber material and was interested to see how it compared to metal. Nadir informed me his carbon fiber material is a mixture of carbon and fiberglass with these mouthpieces being the first non-metal Guardala mouthpiece ever made. Both the SKY and MBII were extremely light mouthpieces and as you can see from the picture, had a booster at the end of the mouthpiece which Nadir says helps balance and stabilize the sound. I test played a 7* Sky and 7* MBII. Compared to the traditional MBII and SKY in metal, this mouthpiece in carbon fiber played extremely well and had many of the same characteristics and feel of a metal mouthpiece. The sound was focused, warm, and both mouthpieces could be pushed without the sound backing off across all registers. Nadir told me that by using carbon fiber and today’s CNC machines he is now able to offer the MBII, SKY, and Studio Model at a lower price point than his traditional metal mouthpieces. Although at the end of the day I still preferred my slant link, I can see why so many players like Nadir’s line of mouthpieces.

While test playing both the SKY and MBII, I used a traditional cane reed as well as tried Harry Hartmann’s new Carbon Onyx Fiberreed. After play testing both mouthpieces with each reed, I still prefer the sound and feel of traditional cane. This carbon onyx reed sounded very similar to cane and even the feel was close but there were some subtle differences which is why I still prefer traditional cane (at the moment). I would have to say the carbon onyx Fiberreed is my favorite synthetic reed’s that Harry Hartmann’s is offering at this time.

http://nadirsaxwind.com/fibercarbon/

https://fiberreed.de/en/

LC Saxophones

(This is not the model I test played at NAMM but is part of the T-600 series)

I have heard and know of the LC saxophone line from Taiwan but have never had the chance to sit down and actually test play one. After visiting a few booths and running into Woody Witt (great saxophonist and educator from Houston Texas), he told me to check out some of the saxophones at the LC Saxophone booth. When I visited the booth, I test played the various tenor saxophone models which ranged from the T-601-T604. The model I and many players seem to prefer was the “vintage” finish which I believe was the T-603 model made up of 95% red copper. This high copper content I have not seen in the past and traditionally many saxophones that do utilize copper are around 85% copper. This saxophone had blue steel springs, Italian leather pads, metal resonators, black mother of pearl key touches, a high F# key and no engraving. I overall liked the sound of this saxophone but would request that the action be lighter. The overall tuning from top to bottom was pretty good and I was able to try a sterling silver neck with this model which I did enjoy as well. The overall setup and construction felt good with all pads sealing and tone holes level but I would have some adjustments made by my repairman in terms of action and key heights. I am looking forward to trying out the LC saxophones at the next NAMM show and spending a bit more time with these various models.

http://www.lcsax.com/

Marmaduke “Feather” Strap III

While visiting Marmaduke Mouthpieces and Straps, Alex Miyatake, owner of Marmaduke Music, introduced me to his Marmaduke “Feather Strap” III. This strap was designed to alleviate pressure from your neck and distribute the weight equally across your shoulders. I typically use a saxholder neck-strap but tried the Marmaduke “Feather” Strap III strap to see how it compared to the “Feather” Strap II. The newly designed slider on the 3rd version made it easier to adjust the height and in addition, the new brass hook attached to the saxophone strap ring more securely and gave me similar mobility that I experience when using my saxholder neck-strap. This Marmaduke “Feather” Strap III comes in one size for soprano, alto, tenor, and baritone saxophone. Overall, I think Alex made some nice enhancements to this neck-strap and I am looking forward to using the new Marmaduke “Feather” Strap III on alto and tenor saxophone.

Marmaduke “Feather” Strap III Product Info

Trevor James Signature Custom Series “Vintage” Tenor Saxophone

I have been checking out the Trevor James Signature Custom Series saxophones for over the past four years and this line by Trevor James gets better and better every single year. When I stopped by the booth this year, I test played the RAW XS, RAW, Silver, and Gold Lacquer finishes. One of the RAW XS tenor models, I would call their “vintage” prototype in terms of the ergonomics and keys were laid out just like a 5 digit Mark VI (without high F#) which is different from the traditional signature custom series saxophones. In addition, this model is going to be setup with a different neck which will most likely please those players looking for a bit more weight or back-pressure to push against resulting in some additional complexities and character to the overall sound. I really enjoyed this tenor when it came to the ergonomics, key layout, and overall response and consistency from top to bottom. This Raw XS “vintage” prototype and the Trevor James signature custom line of saxophones were incredibly consistent from horn to horn which is not always the case while test playing various manufacturers saxophones. I want to thank Sandro, Tom, and David for allowing me to spend some time to test playing each horn and especially David for spending a great deal of time setting each horn up because they all really played great. I am looking forward to re-visiting the Trevor James booth at next year’s NAMM show and am looking forward to further play testing the RAW XS “vintage” prototype this year.

Trevor James Signature Custom Series Tenor Comparison

CE Winds Pure Vintage OL Slant Signature Tenor Saxophone Mouthpiece & Pure Vintage NY Meyer Alto saxophone mouthpiece

When I stopped at the CE Winds booth this year, I had the opportunity to test play the CE Winds Pure Vintage Otto Link Slant Signature tenor mouthpiece and Pure Vintage NY Meyer Alto saxophone mouthpiece.

Pure Vintage OL Slant Signature Tenor Mouthpiece

I play on an original Otto Link Slant Signature tenor mouthpiece with a 7 tip opening. Brian Seltz, President of CE Winds, had 2 Pure Vintage OL Slant Signature tenor mouthpieces in 7* tip openings. I tried both mouthpieces and overall was impressed by the response, projection and play-ability. This mouthpiece felt very similar to my current slant link and embodied many of the same characteristics (edge, warm, dynamic range, etc). I will say the CE Winds Pure Vintage mouthpiece played a little bit brighter than my current slant as well as was a bit more free-blowing than my current slant. Overall, this is my favorite hard rubber mouthpiece CE Winds has to offer especially for those players looking for a Slant Link copy at a very affordable price of $199. I know this mouthpiece is not made out of hard rubber but a resin or composite that I would agree feels and responds very similar to hard rubber but would prefer hard rubber. Brian told me the Pure Vintage OL Slant Signature Tenor Saxophone Mouthpiece was designed from an original “Big” USA 7* Slant Signature made by Otto Link in Pompano Beach, Florida – tip measures out to approximately .107″.

https://www.youtube.com/watch?v=mZDxMdb8PxY

Pure Vintage NY M 6M Alto Mouthpiece

 

 

The vintage New York Meyer mouthpieces are some of the best hard rubber mouthpieces I have played to date but as many of us know, they are quite hard to find and if you do find one, these mouthpieces are demanding much higher prices than many other modern and vintage mouthpieces on the market today. I found the CE Winds Pure Vintage NY Meyer 6M to play very similar to an original New York Meyer mouthpiece I have played in the past. The CE Winds Pure Vintage NY Meyer was warm, great articulation, tuned well, even scale throughout, and had a very similar response and buzz that many of us who have played vintage Meyers are looking for in a mouthpiece. Like the Pure vintage OL Slant tenor mouthpiece, the CE Winds Pure Vintage NY Meyer is made up of the same material and I would also note that this mouthpiece played a tad brighter than N.Y Meyers’s I have played in the past which could be to do the material but it is hard to say. Brian informed me that the Pure Vintage N Y M 6M Alto Saxophone Mouthpiece was designed from an original Meyer New York USA, Medium Chamber 6M Alto Saxophone Mouthpiece with a tip measuring out to a .076. Like the CE Winds OL Slant tenor mouthpiece, overall, this is my favorite alto hard rubber mouthpiece CE Winds has to offer especially for those players looking for a New York Meyer copy at a very affordable price of $179. I want to thank Brian for allowing me to try both these mouthpieces and hope to play both these mouthpieces in the near future.

https://www.youtube.com/watch?v=7LbkaS9ASho

D’Addario Select Jazz Tenor Mouthpiece

Since The D’Addario Select Jazz alto mouthpiece came on the market as D’Addario’s efforts to offer a professional vintage meyer-like copy at a very affordable price, D’Addario will soon be releasing their D’Addario Select Jazz Tenor Mouthpiece. I was able to meet up with Kristen Mckeon, Product Specialist at D’Addario, and she was nice enough to let me try a D’Addario Select Jazz Tenor Mouthpiece with a 7 tip opening. I found out that this mouthpiece was based on one of Jeff Coffin’s Freddie Gregory mouthpieces that he has played for quite some time. When I test played the D’Addario Select Jazz tenor mouthpiece to compare to my Slant Link I was pleasantly surprised. I found the D’Addario Select Jazz tenor mouthpiece responded well with the sound leaning a bit towards the brighter side compared to my slant but for a mouthpiece that is completely CNC’d, there was warmth, edge, and character to the sound. This mouthpiece articulated very well and personally, I think this new tenor mouthpiece will be more popular than the existing D’Addario Select Jazz alto mouthpiece. With that being said, the D’Addario Select Jazz tenor mouthpiece will be released in March and I wanted to thank Kristen for allowing me to play test the new D’Addario Select Jazz Tenor mouthpiece.

ReedGeek Klangbogen (New Finishes)


After testing playing the Klangbogen at the 2016 NAMM show (2016 NAMM Show Saxophone Gear Roundup), I visited the ReedGeek booth again and Mauro (Owner of ReedGeek) introduced me to the various new finishes that he has just released. Mauro told me found surprisingly that each finish had some impact on how the saxophone responded and it’s completely personal taste which Klangbogen finish various players have chosen. Mauro did inform me that those players who play on Yamaha’s and Yanagisawa’s currently, will be excited to know a Klangbogen model that fits both these brands and others will be released very shortly. I currently use the standard brass finish Klangbogen but here are the new finishes that just came out and there overall sonic characteristics according to Mauro:

  • High-Polished Brass: “ Add’s great focus and guts to the sound”
  • Marbled Brass: “Promotes the darkest core and “woofy” like core”
  • Brushed Matte Brass: “The most bell-like high’s”
  • Sterling Silver-Plate: “Promotes the clarity of the sound in the high frequencies”
  • 24KT Gold Plate: “The richest and most velvety sound”

I recommend trying out each finish of the Klangbogen to see which one works for you and fits your particular saxophone. I did hear a difference between each and overall do feel that using the Klangbogen offers a more fluid and consistent response throughout all registers of my saxophone. I want to thank Mauro for taking the time to sit down and show me each different finish.

http://www.reedgeek.com/klangbogen/

Sax Dakota 42 and 52 alto and tenor saxophone

When I stopped by the Sax Dakota booth this year, Pete LaPlaca, (Owner of SaxDakota) and David Hayes(artist relations manager) introduced me to their new SDA-XR 42 (alto) and SDT-XR 52 (tenor) saxophones. I had reviewed the SDT XR 92 a few months back (Sax Dakota SDT-XR-92 Review) and wanted to see how the new XR 42 and XR 52 compared. The tenor model utilizes a 6.26” graduated bell size and the alto a 5.32” alto bell size. The triple neck strap ring, double key arms and low profile key cups/pads are just a few features of the new features on the XR 42 and XR 52 models. The body/bow/and bell are plated in a semi matte dark onyx finish over a bronze alloy that it utilized in the XR 82 and XR 92 models. The necks were finished with a silver plating and hand engraved. I found the XR 42 and 52 to responded similarly to the XR 82 and 92 models but found that both new models were a bit more free-blowing which I think can be attributed to the new neck taper. I found the overall intonation and action was good but would have the spring tension lightened. My recommendation would be if you enjoy playing on the XR 82 or XR 92 model, you should check out the XR 42 and 52 models.

http://www.saxdakota.com/products.html

Silverstein Estro Ligature and OmniCap

The Silverstein ligatures have grown in popularity over the years so I decided to stop by the booth this year to see what new products they had in store for 2017. Timothy Zerone and Sean Yang told me about the new Silverstein Estro ligature, Omnicap, and upcoming news on the Silverstein saxophone reeds coming out later this year. I compared the Silverstein Cryo 4 which I have played for some time on tenor against the new Estro ligature. Some of the new features on the Estro ligature are as follows: the harmonic enhancers or metal bars now contact the mouthpiece, zircon gemstones were added for appearance, and a thinner thread was utilized to allow the reed to vibrate even more just to name a few. I found subtle differences between both ligatures but found while test playing each one, the new Estro ligature vibrated a bit more than the Cryo 4 and found the sound to project more in the upper and lower register while the Cryo 4 I found pushed the sound a bit towards the darker spectrum. In addition to the Estro ligature, Silverstein introduced the Omnicap which is a new mouthpiece cap designed to be light-weight, fit all mouthpieces, and preserve reed moisture. I want to thank Sean and Tim for discussing Silverstein’s new products for 2017 and can’t wait to check out the Silverstein saxophone reeds once they come out in stock.

https://www.silversteinworks.com/

Forestone RX Saxophone

When I visited the Forestone booth this year, Lar’s Heusler (CEO of Forestone) introduced me to the rolled tone hole model saxophone offered by Forestone called the RX model. The RX model has  rolled tone holes that are soldered on and this saxophone goes thru Forestone’s “W Cryo treated” process which means they cryogenic freeze all parts of the saxophone twice as the effect is even more noticeable for allowing the brass to naturally resonate. The setup on this model is very much close to the straight tone hole model in terms of action and key layout. I prefer the straight tone hole model but for those of you that have played rolled tone hole model saxophones currently will very much like this option from Forestone. I want to thank Lars for adding this new model to the Forestone line of saxophones.

Ergonomic Sax Stand

Besides testing out various saxophones, neckstraps, reeds, ligatures, mouthpieces, necks, etc. I am always interested in finding out if there are any new and one of a kind products on the market that could potentially help saxophonists. One product I had never seen before was the Ergonomic Sax Stand. I met John Mackey, Fiona Nelms, and Stephen Holgate from The Australian National University. John Mackey told me that as a saxophone player he was suffering from a bad spine and neck pain and with engineer Stephen Holgate’s help, the Ergonomic Sax Stand was born. This saxophone stand can accommodate alto, tenor and baritone saxophone and is height adjustable. The stand was designed to take up to 100% of the weight off the player’s neck although this can be adjusted for individual preference. What’s important is this stand allows a full range of movement while being used and would mostly likely fit well in recording studios and teaching environments. I was a bit hesitant at first regarding the Ergonomic Sax Stand but after trying this stand and adjusting, I noticed the Ergonomic Sax Stand can remove all the pressure from your neck. The new Ergonomic Sax Stand coming out later this year will be made out of carbon fiber for portability and resilience. I know many of us use various neckstraps and harnesses to distribute the weight from our neck to our shoulders evenly but for those of you that have severe back problems or are realizing more neck, shoulder, and back pain from playing, should seriously consider checking out the Ergonomic Sax Stand see if it is the right fit for you. Whether you use it during performances or to simply practice, the stand works.

https://www.youtube.com/watch?v=6gc1e61ft0I&feature=youtu.be

Honorable mentions

Conclusion

The 2017 NAMM Show was filled with new artists, products, and most importantly new exhibitors showcasing their saxophones, ligatures, mouthpieces, reeds, necks, neck straps, sax stands and the list goes on. What I have seen over the past 5+ years, besides the introduction of new products, is improvements in the manufacturing and assembly of saxophones and accessories. These improvements I believe have led to the manufacturing of better quality saxophones/accessories at a more affordable price point allowing more players access to better quality equipment. Unfortunately, I was not able to visit every booth at the show that I wanted to and spend the amount of time I would have liked to test play various products. As always, to any of the manufacturers I met at NAMM, if I did not include you in this list, this is not a reflection on your product, it just came down to time. If you would like me to review your product specifically or have any questions, please feel free to contact me using the information from my author bio below. Again, another great NAMM Show and I can’t wait to see what NAMM 2018 has in store for us saxophonists next year!

The post NAMM 2017 Saxophone Gear Roundup appeared first on Best. Saxophone. Website. Ever..

NEW: The D’Addario Select Jazz Tenor Mouthpiece

$
0
0

 

Introduction

While attending the 2017 NAMM Show (2017 Saxophone Gear Roundup), I had a chance to briefly test play the new D’Addario Select Jazz tenor mouthpiece 7M tip opening. A few weeks after NAMM, Kristen Mckeon, Product Specialist at D’Addario, was nice enough to send me a 7M (.105) tip opening to further review. For those of you who are not familiar with D’Addario, D’Addario produces some of the world’s most popular reeds, including D’Addario Reserve, La Voz, D’Addario Jazz Select, Rico Royal, and Hemke (among others) . I am going to be reviewing the new D’Addario Select Jazz Tenor mouthpiece on the following criteria: sound, intonation, response, and overall quality. To begin, I have included a brief product overview.

Product Overview

According to Kevin Garren, Project Specialist at D’Addario, the design of the D’Addario Select Jazz tenor mouthpiece was inspired by Jeff Coffin’s Freddie Gregory mouthpiece, which was an original Freddie Gregory Super Deluxe blank, and not an Otto Link. Jeff Coffin’s Freddie Gregory mouthpiece was not in its original state, having been refaced by Freddie himself at Jeff’s request at some point. These modifications to the original Super Deluxe resulted in a very unique model that D’Addario used as a baseline and made various design changes based on Jeff’s feedback as well as extensive market research. The chamber size and baffle shape remain somewhat similar to Jeff’s mouthpiece, but the facing, window, side rail and tip rail shapes all were modified. The original mouthpiece also had a slightly different tip opening of 2.73mm, which Kevin mentioned they had to make facing and baffle changes to match the tip openings that the market was currently asking for. Jeff’s original facing also had some flat spots that were eliminated. The D’Addario Select Jazz blank is slightly larger overall, with changes to the beak, side profiles, and the bore was modified and slightly tapered to adapt to the CNC machining used to make this mouthpiece. These changes resulted in greater machining consistency without sacrificing performance.

Sound

The D’Addario Select Jazz mouthpiece surprisingly shared many of the same characteristics that I have found in my current slant link. Compared to my slant link where I find the overall sound to lean towards the darker side, the D’Addario Select Jazz tenor mouthpiece overall leaned towards the neutral side from the low to mid-range and when I played into the upper register the sound was a bit brighter. I found this mouthpiece had overall character in terms of edge, warmth, core, good projection and flexibility. I did find my slant link had some more timbre and flexibility throughout the entire range but do feel that the overall sound on the D’Addario Select Jazz mouthpiece is more consistent with much clarity in the sound through-out the entire range.

Intonation

I found the intonation on the D’Addario Select Jazz tenor mouthpiece to play very well from low Bb to high F# and even into the altissimo range.

Response

This mouthpiece responded well and was easy to control at various dynamic levels. I found this mouthpiece to be freer blowing than my current slant link and at the same time I found that I could push a lot of air thru this mouthpiece without the sound cutting out. What I really enjoyed about the D’Addario Select Jazz tenor mouthpiece was how easy it was to articulate which for me was the most noticeable difference between this mouthpiece and my slant link. I test played the D’Addario Select Jazz mouthpiece with various reeds/cuts from WoodStone, Fiberreed, Lupifaro, and Rigotti and all reeds responded well overall with this mouthpiece. This was a great discovery because I find certain mouthpieces are not as reed friendly as others.

Quality

The CNC machine work done on these D’Addario Select Jazz tenor mouthpieces is great. I have from time to time tried certain brands where there were noticeable shortcomings evidenced by uneven rails and a table that was not smooth. Fortunately, this is not the case with the new D’Addario Select Jazz tenor mouthpiece. Using solid rod rubber and milling for this mouthpiece is an effort to recreate the vintage sound and quality of the past but at a price point that any serious musician could afford.

Overall

I am very excited that D’Addario has recently introduced there new Select Jazz tenor mouthpiece. If you are in the market for a well-rounded hard rubber tenor mouthpiece or like I was in high school, could not get away with playing a metal mouthpiece in concert band, the D’Addario Select Jazz tenor mouthpiece might be the right fit. I would highly recommend play-testing this mouthpiece to see which tip opening works for you. The D’Addario Select Jazz Tenor Mouthpiece currently comes in four tip openings: D6M (.100), D7M (.105), D8M (.110), and D9M (.115). I personally would like to try the D6M (.100) since I typically prefer a 7 tip opening but the D7M (.105) played extremely well. I would compare the D’Addario Select Jazz tenor mouthpiece to a V16, Jody Jazz hard rubber, and modern Otto link hard rubber mouthpiece just to name a few and see how each mouthpiece compares to each other. At the end of the day, you have to choose the mouthpiece that you feel most comfortable on and I believe the new D’Addario Select Jazz tenor mouthpiece might be the right mouthpiece for you especially for a price point under $200 dollars.

Amazon Link

D’Addario Select Jazz Tenor Mouthpiece

D’Addario Website

D’Addario Product Detail

The post NEW: The D’Addario Select Jazz Tenor Mouthpiece appeared first on Best. Saxophone. Website. Ever..

NEW: Phil-Tone Line of Mouthpieces

$
0
0

Introduction

I have seen various saxophonists playing on Phil-Tone mouthpieces as well as vintage mouthpieces refaced by Phil Engelman for sale on eBay and Craiglists but have never had the chance to test play Phil’s various mouthpieces for myself until now. I will be test playing four different Phil-Tone tenor mouthpieces (2 metal & 2 hard rubber) and four different Phil-Tone alto mouthpieces. I will be reviewing each mouthpiece on the following criteria: Tone, Build Quality, Intonation, and Overall Thoughts.

Tenor Mouthpieces

Phil-Tone Eclipse 7*

Tone

The Eclipse model leaned towards the darker side of the sound spectrum. The Eclipse featured rounded inner side walls with a medium open chamber. I Found the Eclipse had a nice core to the sound rather than playing more spread. This mouthpiece could play edgy when pushed and overall had good projection.

Intonation

The intonation was great on the Eclipse. Compared to my Slant Link the Eclipse was very comfortable throughout the entire range of the saxophone and it took little time to adjust to.

Build Quality

The baffle, inner side walls, side rails, chamber and table on the Eclipse was even and I did not notice any flaws or un-evenness on this mouthpiece. I believe this can be attributed to Phil working on each mouthpiece by hand and test playing each one numerous times before sending them out. This is a common theme you will see with all of Phil’s mouthpieces.

Overall

The Eclipse is a great playing “straight ahead” hard rubber mouthpiece for those players looking for a medium dark sounding mouthpiece with a little bit of resistance that very much reminded me of the play-ability of my link.

http://www.phil-tone.com/tenor/eclipse

Price: $325

Phil-Tone Intrepid 7*

Tone

The Intrepid model was designed for those players who enjoy or have been playing on an Otto Link Reso Chamber. This model features a flat angle step baffle rather than a rollover baffle seen on Phil’s Sapphire model. In addition, the window is also longer than one would see on various vintage link models. I found the Phil-Tone Intrepid was even darker sonically compared to the Eclipse. The Intrepid had complexity, warmth, and edge to the sound as well as playing slightly more resistant than the Eclipse.

Intonation

The intonation was great on the Intrepid. Similar to the Eclipse, the Intrepid was very comfortable through-out the entire range of the saxophone and it took little to no adjustment.

Build Quality

The baffle, inner side walls, side rails, chamber and table on the Intrepid was even and I did not notice any flaws or un-evenness on this mouthpiece.

Overall

The Intrepid is a great playing complex sounding hard rubber mouthpiece for those players looking for a dark sounding mouthpiece with some resistance that very much embodied characteristics seen in the vintage Otto Link Reso Chamber mouthpieces.

http://www.phil-tone.com/tenor/sapphire (Intrepid description)

Price: $385

Phil-Tone Tribute 7*

Tone

The Tribute model as according to Phil was produced in collaboration with Theo Wanne to introduce the best possible Florida Link without any modifications so players had access to a mouthpiece that had the best feel and sound of  a Florida link. Sonically, I found the Tribute to play medium bright with the sound being best described as “Coltrane-ish.” I am not saying you will necessarily sound like Trane playing this mouthpiece (one would wish) but the edge, color, complexity and resistance pertaining to the tribute simply reminded me of Trane’s sound. The tribute had a great focus to the sound as well as was very easy to articulate.

Intonation

The intonation was great on the Tribute. Compared to my Slant Link the Tribute did take me a little bit of time to adjust to but this metal mouthpiece played well through-out the entire range of the saxophone.

Build Quality

The collaboration between Theo and Phil clearly shows in the quality of manufacturing the Tribute. The attention to detail and R&D can clearly be seen by the machine work being extra clean with no flaws anywhere on the table, side walls, tip, etc.

Overall

If you currently play on a vintage metal link or have been searching for one as well as are a Coltrane fanatic, the Tribute is a mouthpiece you should take into consideration. Please note that the standard tip opening for the Tribute is a 7* (.105) but Phil does take custom tip orders.

http://www.phil-tone.com/tribute-and-mosaic

Price: $495

Phil-Tone Mosaic 7*

Tone

The Mosaic model as according to Phil was produced in collaboration with Theo Wanne to introduce a mouthpiece inspired by the sound of Dexter Gordon. Phil told me that this mouthpiece is a cross between a Dukoff Hollywood and Dukoff Stubby and is not a copy. Sonically, I found the Mosaic to lean towards the medium-bright side similar to the Tribute but the sound I found to be broader, denser, and not as focused or edgy as the Tribute. I found the Mosaic to have a warmer sound than the Tribute as well as was less resistant which as many of us know is a personal preference.

Intonation

The intonation was great on the Mosaic. Compared to Tribute I found it took me less time to adjust to based on the facing curve which I am more comfortable playing on. The Mosaic mouthpiece played well through-out the entire range of the saxophone.

Build Quality

The collaboration between Theo and Phil clearly shows in the quality of manufacturing the Mosaic. The attention to detail and R&D can clearly be seen by the machine work being extra clean with no flaws anywhere on the table, side wails, tip, etc.

Overall

If you are looking for a metal mouthpiece that is dense, spread, and even-throughout the entire range, the Mosaic is a mouthpiece you should take into consideration. Please note that the standard tip opening for the Mosaic like the Tribute is a 7* (.105) but Phil does take custom tip orders.

http://www.phil-tone.com/tribute-and-mosaic

Price: $495

Alto Mouthpieces

Phil-Tone Rift

Tone

The Rift model as according to Phil has a unique mouthpiece design with a rollover baffle and a secondary baffle in the floor. Phil said that this will help facilitate clean and robust sounding highs as well as lows. Sonically, I found the Rift was incredibly easy to play with a rich core that really projected and could take a lot of air without cutting out. I noticed especially in the palm keys that the sound was not thin but rather full and even. Of the Phil tone alto models I test played, the Rift was by far the loudest and really projected.

Intonation

The intonation was great on the Rift. I would say at first I had to adjust because for me the Rift is incredibly easy to play with very little effort across the entire range of the saxophone which possibly can be attributed to this facing.

Build Quality

Similar to Phil’s tenor model mouthpieces, the Rift’s baffle, inner side walls, side rails, chamber and table were even and I did not notice any flaws or un-evenness on this mouthpiece.

Overall

If you are looking for a very free-blowing and dynamic hard rubber alto mouthpiece that really projects and cuts, the Rift might be the right model for you.

http://www.phil-tone.com/alto/the-rift

Price: $325

Phil-Tone Novella Jazz

Tone

The Novella Jazz model is one of Phil’s newest mouthpieces he has just released. Phil informed me that compared to the Novella Classic which has a traditional Soloist type baffle, the Novella Jazz has a rollover baffle inspired by the music of Kenny Garrett. Sonically, I found the Novella jazz had a bit more resistance than the Rift but had a nice balance between a solid core with good projection and was a medium-bright playing mouthpiece.

Intonation

The intonation was great on the Novella Jazz. Compared to the rift, this mouthpiece was not as free-blowing but had a facing more used to what I am comfortable playing on so it took little time to adjust.

Build Quality

Similar to the Phil-Tone Rift model, the Novella Jazz baffle, inner side walls, side rails, chamber and table were even and I did not notice any flaws or un-evenness on this mouthpiece.

Overall

If you are looking for an alto mouthpiece with good projection, core, and slight edge, the Novella Jazz is worth checking out.

http://www.phil-tone.com/

Price: $325

Phil-Tone Solstice

Tone

The Solstice model is one of Phil’s original model alto saxophone mouthpieces that has gained much popularity. Unlike a Meyer, the Solstice was designed with the “West Coast” sound in mind which reminds me of such saxophonists such as: Lee Konitz, Paul Desmond, Art Pepper, etc. According to Phil, The Solstice has a rich core and full harmonic palate that is easy to achieve and not resistant like other mouthpieces going for the “West Coast” vibe. Sonically, I found the Solstice had a complex timbre which played brighter than various Meyer mouthpieces I have test played. This Solstice was incredibly flexible with slight resistance compared to the Rift. I found this mouthpiece was balanced from top to bottom and really did have that “West Coast” vibe to it.

Intonation

The intonation was great on the Solstice. Even though I found the Solstice to play on the brighter side, it was not shrill in the palm keys and was easy to adjust to which is not always the case with various alto mouthpieces that lean towards the brighter side.

Build Quality

Similar to the Phil-Tone Novella Jazz model, the Solstice baffle, inner side walls, side rails, chamber and table were even and I did not notice any flaws or un-evenness on this mouthpiece.

Overall

If you are looking for that “West Coast” vibe, I really think the Solstice is a great option that you should test play and see how it compares to your current setup.

http://www.phil-tone.com/alto/the-solstice

Price: $325

Phil-Tone Meyer

Tone

The Phil-Tone Meyer is one of Phil’s most popular mouthpieces. The Phil-Tone Meyer is a corrected and customized version of the current Babbitt Meyer. Phil told me that with his Meyer, “he made sure the table is flattened, the throat is slightly enlarged, and a proper facing is applied for easy of play and response.” Sonically, I found the Phil-Tone Meyer to play very similar to various N.Y. Meyer’s I had played in the past. The Phil-Tone Meyer was free-blowing with a solid core. I found the sound to be right in the middle neither too bright nor too dark. This mouthpiece had the edge and projection which I did not find on my modern Meyer and the overall play-ability and resistance level felt much closer to a vintage Meyer compared to my modern Meyer.

Intonation

The intonation was great on the Phil-Tone Meyer. This mouthpiece for me took no time to adjust to and felt right at home.

Build Quality

Similar to the Phil-Tone Solstice, the Phil-Tone Meyer baffle, inner side walls, side rails, chamber and table were even and I did not notice any flaws or un-evenness on this mouthpiece.

Overall

If you are looking for a really good copy of a vintage N.Y Meyer or Meyer Bros mouthpiece that comes very close to an original, you must try the Phil-Tone Meyer and see what you think.

http://www.phil-tone.com/alto/the-custom-meyer

Price: $279

Overall Thoughts

I want to thank Phil Engelman for taking the time to send me his various tenor and alto model mouthpieces. I really enjoyed playing each one of them and was overall impressed by the quality of work on each mouthpiece. I ended up purchasing the Phil-Tone Meyer mouthpiece because it was noticeably better than my current setup and I am currently interested in play testing Phil’s Sapphire model in a 7 tip opening which I believe will play similar to my slant link. Again, I want to thank Phil for sending me his various model mouthpieces and if anyone is interested in one of Phil’s mouthpieces or has questions regarding a specific model, please reach out to Phil and I know he is more than happy to assist.

Website

http://www.phil-tone.com/

The post NEW: Phil-Tone Line of Mouthpieces appeared first on Best. Saxophone. Website. Ever..

Morgan Mouthpieces: Are they right for you?

$
0
0

Introduction

Morgan mouthpieces have been around for over 30+ years and have been quite sough after as a viable alternative to the highly desirable and expensive vintage Meyer and Otto Link hard rubber mouthpieces. I have heard great things about the Morgan line of mouthpieces from many saxophone students, professionals, and teachers who say they are consistent from mouthpiece to mouthpiece, play evenly, and are an overall great value. Today, I will be reviewing the Morgan Jazz tenor and soprano mouthpieces which is one of the four models currently being offered by Morgan (Classical, Jazz, Vintage, Excalibur). I will be discussing the tone, intonation, build quality, and my overall thoughts but first, I would like to provide you some background and history on Morgan mouthpieces.

Background & History

In the early 1980s, Ralph started his own mouthpiece manufacturing company. His goal was to bring back the “Chart Designed” and handcrafted mouthpieces which were popular in the 1930s-1960s. With the strong attention to detail, Ralph designed and produced some of the best-hand crafted hard rubber mouthpiece in the world. Ralph sadly passed away on August 23, 2007 but his company and products are being continued by Ralph’s long-time employees alongside David and Teresa Hoskins who currently own the company. Erik Greiffenhagen has been with the company for over 30 years and the lead designer for several of the mouthpieces the company produces today. Brian Powell made Morgan mouthpieces for over 15 years before starting his own re-facing business and has recently returned to the Morgan team.

The rubber formula is unique to the Morgan Company. The rubber is made from the finest grade European Ebonite similar to the same rubber formula that was used by the best manufacturers during the 1920s-1950s. In 1990, Ralph designed the molds that create the blanks for his clarinet, alto and tenor mouthpieces. No other mouthpiece company uses the same molds or blanks. Ralph insisted on old Steam Transfer Presses to produce the blanks rather than modern methods, which can leave soft spots in the rubber. After the rubber blanks come out of the molds, they are very soft rubber castings. To cure the rubber, the mouthpieces go through several cycles of heating and cooling to create a cured, hard rubber casting that is ready for facing. The castings are then faced and finished by some of the most skilled mouthpiece makers in the industry. Erik, John and Brian have spent their entire careers working full-time on producing Morgan products as well as working on their own mouthpiece making and re-facing ventures. All of the Morgan mouthpieces are hand-faced and finished to precision. Please see the video below regarding Morgan’s mouthpiece manufacturing process as well as mouthpiece evolution process below.

Morgan Mouthpiece Manufacturing Process

Morgan Jazz Large Chamber Soprano Mouthpiece (5L)

Product Overview

The Morgan Jazz Large Chamber Soprano mouthpiece was “inspired by the older vintage mouthpieces from the 1920’s to 1960’s. This Morgan soprano mouthpiece has a large round chamber with no choke in the throat and a shorter shank which is different from most modern soprano saxophone mouthpieces which have a smaller chamber with a choke throat. Morgan find’s that the shorter shank allows for a better tuning range and contains a warm, rich and dark tone.

Current Available Tip Openings: 1 (.045), 3 (.050), 4 (.055), 5 (.060), 6 (.065), 7 (.070), 8 (.075)

Tone

I found that Morgan Jazz large chamber soprano mouthpiece embodied a very dark and warm sound as Morgan described in their product description. I believe if I played the medium chamber compared to the large chamber, my overall sound would lean more towards the brighter side. I found the sound had a nice combination of focus and spread throughout the entire range and you could push quite a bit of air without the sound starting to thin out.

Intonation

The intonation was even throughout. I do find it difficult to tune when playing soprano especially since I play tenor mainly but the Morgan Jazz large chamber soprano mouthpiece did not take much time to adjust to and believe the larger chamber might contribute to the ease of tuning and comfort for me.

Build Quality

I found the quality of the hard rubber and facing to be clean. I know Morgan mouthpieces prides themselves on still making mouthpieces the traditional way by hand instead of leveraging various CNC machines during the process. The response of the traditional hard rubber material was great and the rails and table were even and smooth.

Overall Thoughts

The Morgan Jazz large chamber soprano saxophone mouthpiece was a great all-around hard rubber mouthpiece that played evenly and dark throughout the entire range of the saxophone. I would recommend trying one of the other Morgan soprano mouthpiece models or different chamber size if you prefer an overall brightness to your sound or different facing but for me I really wanted a soprano mouthpiece that was easy to keep in tune across the entire range of the saxophone as well produces a warm sound that is easy to blend while playing in a section.

Price: $289 (includes a Rovner star series ligature)

Link: Morgan Jazz Large Chamber Soprano Saxophone Mouthpiece

Morgan Jazz Tenor Model (8 MLL)

Product Overview

The Morgan Jazz tenor saxophone mouthpiece is a completely handcrafted pure hard rubber saxophone mouthpiece made the “old fashioned” way with 100% pure rubber formula, which is the same as was used by manufacturers in the 1920s-1950s. The facing curve, interior chamber and baffle are all shaped by hand. The Morgan Jazz tenor model comes in four chambers: “ Medium(M), Medium-Large2 (MLL), Medium-Large1(ML), and Large(L) chamber sizes.  The Large Chamber produces a warmer, deeper and rich tone. The Medium-Large 2 and Medium-Large1 chambers produce a darker core tone with some edge. The Medium Chamber produces a bright, brilliant and centered tone.” Please see chart below for Chamber Tone:

Tone

I found the Morgan Jazz tenor mouthpiece (8MLL) embodies a dark and warm sound as Morgan described in their product description and very similar to the large chamber soprano mouthpiece. Compared to my Slant link, the Morgan Jazz mouthpiece did contain a nice center and edge to the sound that was consistent throughout the entire range and played great at various dynamic levels.

Intonation

The intonation was even throughout and played well in tune into the altissimo range. It was very easy to play at various dynamic levels in tune and I felt comfortable playing on this mouthpiece right away.

Build Quality

I found the quality of the hard rubber and facing to be clean. I know Morgan mouthpieces prides themselves on still making mouthpieces the traditional way by hand instead of leveraging various CNC machines during the process. The response of the traditional hard rubber material was great and the rails and table were even and smooth.

Overall Thoughts

The Morgan Jazz MLL Chamber tenor saxophone mouthpiece was a great all-around hard rubber mouthpiece that embodied an overall dark sound with focus and character to the sound. Although I still prefer my hard rubber Slant link due to the overall additional projection, core, edge, and warmth I can obtain on this mouthpiece, I was impressed with the overall quality after trying the Morgan Jazz tenor mouthpiece. I would recommend if you prefer a brighter sound, you might want to try the ML or M chamber to see how it compares.

Price: $279 (includes a Rovner star series ligature)

Link: Morgan Jazz Tenor Saxophone Mouthpiece

Final Thoughts

I would like to thank Teresa Hoskins for sending me the Morgan Jazz Large Chamber soprano mouthpiece and Morgan Jazz MLL Chamber tenor saxophone mouthpiece to test play. I was overall impressed with the overall construction, sound, and intonation on both mouthpieces. The Morgan Jazz Large Chamber soprano mouthpiece is a great modern mouthpiece that I found was easy to play in tune and the Morgan Jazz MLL Chamber tenor mouthpiece is a great alternative or back-up to my current Slant Link. If you would like to find out more about the Morgan line of mouthpieces, please check out the link below:

Website: https://www.morganmouthpieces.com/

The post Morgan Mouthpieces: Are they right for you? appeared first on Best. Saxophone. Website. Ever..

Viewing all 107 articles
Browse latest View live